Tag Heuer Recent Questions, Troubleshooting Help & Support

send in for repair to a watchsmith

instructions is:
http://www.tagheuer.com/_documents/manuals/EI2254_en.pdf

Very good video of this on youtube. http://www.youtube.com/watch?v=EQJUl64EMIE. Good luck, as the guy on the video says it is complicated!

we wouldnt know

I just managed to solve this problem. Turn the digital face to the first screen which is probably flashing EOL with date. Then pull knob out as if you were going to set the time. Hold in two auxilliary buttons, you should see BAT come up on the screen. That should be it stopped flashing!

You have selected a wonderful watch... Heuer and TAG/Heuer should be gently wound by the motion of the human wrist and the falling of a centrally pivoting weight (there is no ideal direction). AUTO-WIND function is NOT at all unique to your watch... After a couple of CHEAPER "winders" failed me... and after I figured about 4 watches was more than enough to keep wound... I found the greatest BASIC watch winder... to run year over year (efficiently and quietly) MTE watch winder (their very basic WTS-4). Good luck: I WILL try to include the URL (see page 6) http://mte-watchwinder.com/fileadmin/PDF-Uhrenbeweger/MTE_Watch_Winder_Brochure_Engl.__09-2015.pdf

This watch has ETA movement.
The instruction for the watches with the same movement is in
http://www.old-omegas.com/1665en.html

THANK YOU THANK YOU THANK YOU!!! I had a similar issue and this saved me!!!!

Contact manufacturer they will help. :-)

You probably have a screw down crown. Turn the crown counterclockwise and unscrew the crown. Now you should be able to pull it out. When tightening it back down, don't over tighten, just snug. This is to keep moisture out of your watch. Always have it screwed down unless you are setting the watch.

Try the following, which I discovered by accident on my Tag Professional. Pull the crown out to the first position, and then you may find that successive pushes of the upper pushbutton will move one of the chrono hands by one division, and the lower pushbutton will move a different chrono hand. Similarly if you pull the crown out to the second position, the pushbuttons will control the other chrono hands. In this way you can set each of the chrono hands to their zero positions. Hope this works for you. Geoff

why not just take to a watch/jewellery store and get battery changed

Tags once were often on the fake market but this watch should be real. A watch repair shop can open the case and tell you quickly. Its about a $1500 watch new.

Thank You for Article :) http://www.khasbox.com/