Systemax Ascent - Answered Questions & Fixed Issues

You could program a Teensy USB board to send the numbers. It is a great little device because the computer sees it as a human interface device such as a keyboard so sending a 1 from the Teensy would be the same as from a keyboard and the switches could be wired to the device to accomplish this. http://www.pjrc.com/teensy/index.html

Hi Matt, The issue seems to be with the ethernet controller, or the DNS / DHCP service of the computer. Try safe mode with networking and see if that works. you may check the antivirus settings and try a different user profile. if this does not help, then call 1-877-805-1027 for expert help.

Check the settings by opening volume control. Check Managed audio devices and see speaker image is appearing and is tick marked. bye bye!

Assuming the speakers are working, you can test them by plugging them into any other headphone jack, for example your cell phone. Check drivers & etc on computer make sure sound card installed correct. Also verify you are using the correct jack, there may be several for example microphone line in if you have a 5.1 stereo card they may also be ports for the rear speakers.

Check out this site to determine what the beep code is saying. http://www.computerhope.com/beep.htm Remove and re-seat your RAM sticks. Try to get to BIOS and load default settings are just a few things to try.

remove windows 7 and install xp, and try.

The monitor has a separate power supply, 1 AC plug for the computer, 1 fro the monitor. The Power Options only apply to the Computer, your monitor will not shut off via the computer power options.

Go to the control panel and change the user control settings. You can find the control panel in the start menu. If you have any questions, please drop me a line.I hope this helps!David

You can have a try the below steps:1.take a system recovery 2.boot your computer in safe mode, then perform an error check and disk cleaning.3.fix the problem by Windows Boot Genius, free download the software and install it on the other computer and burn a rescue disk.

which operating system ?? XP If your computer came with a motherboard disc the sound drivers could be on it Click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers Click start control panel sounds and audio volume advanced speakers make sure you have selected the (appropriate speakers) also audio you will find 3 drop down lists make sure you have the selected correct speaker settings there Click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it if his does not fix the problem Click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar for any further volume control settings you will need to right click on the speaker volume icon system select adjust volume Click start control panel sounds and audio volume advanced speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand system speaker right click properties then select use this device (enable) also you might check the speaker plug/outlets is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good with no dust as dust causes static electricity clean your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line or use a can of compressed air specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer W7 click start right click on computer select properties then device manager scroll to sound and video game controllers if you see a yellow question/exclamation mark or a red X the driver will need to Click start control panel hardware and sound manage audio devices right click on your speaker select configure speakers right click on the speaker icon in the bottom taskbar you will see an array of options select playback devices make sure it has a green tick and the correct speakers are selected be updated if you computer came with a motherboard disk the drivers could be on it although once speakers are connected widows 7 should automatically update the drivers Click start control panel hardware and sound manage audio devices playback you might have to set a default go for via high definition audio then right click on speaker you might have to configure them then select properties you will see tabs general level in this tab make sure your settings are loud enough also enhancements and advanced from the drop down list in the advanced tab select dvd quality or another then apply Hope this helps.

I don't think these are standard interchangeable parts. Not to say you can't find out there, but they are usually part of the case itself. So you would have to go to the manufacture instead of a regular PC parts storet. Your best bet is eBay or other outlet the sells used units.

first the monitor

Test all power and data leads that attach to your hard drive IDE,SATA

the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty or just replace them they might be faulty

if its a 40 pin flat ribbon type it will be the first to fail

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty

even something as small as a faulty electrical fan and its lead can cause you problems

computers need all power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free

restart your computer then reinstall it this should activate found new hardware wizard try blowing out all of the dust from your keyboard using a fine air blower from an air compressor making VERY sure there is no MOISTURE in the lines. dust causes static which causes lots of problems with a computer and its parts if by now you gan get a screen you might have to uninstall your keyboard restart your computer then reinstall it make sure the lead connection is secure and dust free (if applicable) make sure the usb device is inserted correctly into the Ps2 or usb port (if applicable) click start control panel administration tools computer management device manager scroll to keyboards also mouse you might see a yellow exclamation or question mark ! ? or red x you will need to update driver right click to update driver if your computer came with a motherboard disk the drivers could be on itthis will apply to your mouse you might have to uninstall the mouse and its drivers then restart your computer then reinstall the mouse and its drivers click start right click on my computer select properties device manager control scroll to mice and pointing devices you might see a yellow question mark? right update driver click start control panel mouse you should see 4 tabs buttons pointers pointer options and hardware under hardware you have options to troubleshoot also you can select properties under driver you will have the options update driver rollback driver or uninstall in xp in windows 7 click start control panel hardware and sound mouse you will see the same tabs and options as with xp

hope this helps

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure connection and are not faulty or just replace them they could be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical extension or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly

motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail

check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working

also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in

check you CPU make sure its securely seated and has thermal grease might be getting to hot

another possible reason could be a memory dump you might be running to many programs at the one time putting to much strain on the CPU central processing unit

hope this helps

1) you must reformat you hard disk, for to accept the o.system.2) Try again. If doesnot.You must go to window m. and get support with the o.system.God bless you

your computer mother board is cap-aster is week please change mother board cap-aster and solve the problem

have you checked to make sure your sound card in the computer is working or has it gone out?

if your computer came with a motherboard disc the sound drivers could be on it

click start control panel administration tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers

click start control panel sounds and audio volume advanced speakers make sure you have selected the

(appropriate speakers) also audio you will find 3 drop down lists make sure you have the correct settings there

click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick ithope this helps you

If you installing a new windows you should first delete all partititons and then create one and install windows on that. Remeber all data on your harddisk gonna get deleted. So press d to delete and then c, then enter on the new partition

HiYou may need to check the sound drivers installations.Try playing a CD using Windows media player.This will report a sound error.Download the drivers from your machine's support site.Hope it helps.Thanks

Need motherboard make and model number, version number if possible.Should be printed on the motherboard inside the pc.Also operating system, xp, vista, 7 etc.