Syntax Televison & Video - Page 4 - Recent Questions, Troubleshooting & Support
No signal on screen
Make sure in the setup menu that "Cable" is selected instead of Antenna or off air. then do a channel search with the cable box connected and powered up.
I can't get my Olevia tv (537-B11) to scan for channels
I don't know this model of TV, however, you may find that you need to use the Source button on the remote to cycle through the available inputs & select digital tuner as the input source before you press the Menu button & go into the setup section.
I turned the t.v. off at the t.v. not by the
Make sure the power lead is fully into the socket if it isn't integral. Switch on the tv and hold the power button in for about 10 seconds. Make sure the fuse hasn't blown in the plug.
No tv signal on my olevia 232-s12
cable or Ant.. ? after the scan if there is no channels found (0 digital, 0 analog) then try with cable or Ant to see if any of them work.. if they still don't pick up any channels and the whole yellow progress line goes across.. then it sounds like the tuner on the tv is bad.. and the tuner is part of the main-board so the whole main-board will have to be exchange or repair.. contact Amergence technology they are a 3rd party repair center that service Olevia TV's and they will be able to give you an idea on the repair cost..
<<< Amergence Technology number is 866-965-3842 >>
Not finding what you are looking for?