Syntax Televison & Video - Recent Questions, Troubleshooting & Support


That sounds like a lead is not fully plugged in. Just the green wire is working. Make sure all the leads are fully pushed in.

Syntax Olevia... | Answered on Oct 21, 2017


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. //

Syntax OleviaL... | Answered on Oct 20, 2017


I know it's been a long time since people posted here but the answer is an easy one. On the inverter board you will see a chip that says "OZ960" on that chip you need to solder an led from pin 10 to pin 16. I used digikey's part number L10041-ND. I could get into the technical reason but this fix does work.

Syntax LT30HV 30... | Answered on Sep 29, 2017


Sounds like you have projection bulb problems. Not an easy fix as the are 3 color tubes and a complete alignment when replacing even one of the 3 tubes. Takes a lot of work.

Syntax Olevia... | Answered on Sep 02, 2017


You need the remote, only way. You can most likely get the OEM remote or one that will work like the OEM from this website 1 800 Remotes

Syntax Olevia... | Answered on Apr 19, 2017


I would replace the HDMI cable first, also wiggle the cable at the plugs on both ends, any difference?

Syntax Olevia... | Answered on Apr 19, 2017

Not finding what you are looking for?
Syntax Logo

412 questions posted

Ask a Question

Usually answered in minutes!

Top Syntax Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Wbix

Level 3 Expert

364 Answers

Are you a Syntax Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...