Symbol Computers & Internet - Recent Questions, Troubleshooting & Support

0helpful
1answer

How do I get firmware or a plugin for Zebra Symbol LS4278 Scanner - Model LS4278-SR20157ZZWR

Use " Scanner update utility " to update the firmware. after this try to configure scanner with " 123 scan utility " https://www.zebra.com/us/en/support-downloads/scanners/general-purpose-scanners/ls4278.html#pageandfilelist_895c
5/20/2022 10:41:28 AM • Symbol Computers... • Answered 3 days ago
0helpful
1answer

How to add characters after a scan using a Symbol LS3408

ask the maker this, contact them or go to makers OEM web site click support or to their forum. and be more clear, on end goals.
4/3/2022 1:04:00 AM • Symbol LS3408... • Answered on Apr 03, 2022
0helpful
1answer

Typewriter Brother AX-22, When typing, a wrong symbol showed up.

I lack access to the keyboard. That said, according to the manual on page 13, depressing the code button and holding it down while pressing another key will access the green symbol on that key, part of an alternate set of characters. It you see a green / mark on a key, you have your answer. https://www.manualslib.com/manual/376756/Brother-Ax-22.html?page=17#manual The page 17 you see in the link pulls up page 13 in the manual.
12/19/2021 6:06:53 PM • Symbol Computers... • Answered on Dec 19, 2021
0helpful
2answers

Where is the MAC address located on the Motorola MC9190-G Hand held scanner

From the main screen, select the Wireless card >> Fusion Settings >> Wireless Status >> IP4 status.This then shows you your mac address.

[email protected] or TEL +44(0)1202 620955

http://www.biastechnology.com/

9/21/2021 1:25:42 PM • Symbol Motorola... • Answered on Sep 21, 2021
0helpful
1answer

Scanner 9090 error 811

Check the time and date
7/1/2021 4:15:05 PM • Symbol MC 9090... • Answered on Jul 01, 2021
0helpful
3answers

Looking for software to scan barcodes,

There should be an Exel program loaded onto the unit. You will have enable the scanner through a program. Or simply develop custom application (very costly) or contact us for better solution. You can always contact me directly [email protected] or 630-622-2024 toll free 866-271-9891 Ask for Andrew
6/16/2021 7:08:17 PM • Symbol PDT 8100... • Answered on Jun 16, 2021
0helpful
1answer

How do you Change ip address on pdt 6846

Hi Contact Motorola Solutions Get Support or Zebra Technologies Support Downloads. They aren't helping on FixYa yet so it is best to reach out directly. Mark Motorola Mobility Support
2/4/2021 7:11:30 PM • Symbol PDT 6846... • Answered on Feb 04, 2021
0helpful
1answer

I have a te 2200 and need to change currency symbol from euros to pounds. Please help the user manual isn't much help

The CE key is a toggle between foreign currency and local currency at a preset exchange rate. That is, it converts both ways. If this does not help, you may have to consult casio support for your region.
12/22/2020 8:36:34 PM • Symbol Computers... • Answered on Dec 22, 2020
0helpful
4answers

Ls2208 Barcode Scanner program for

here is the Barcode Scanner Program right now, it seems like being able to scan barcode with Symbol Ls2208 handheld device. if it is not workiing, go to this barcode website to find more compatible software for Ls2208, i am sure you will find the proper one. NET Barcode Reader Barcode Reader ASP NET Barcode Reader VB NET Barcode... Barcode Components NET Barcode Generator Reader Java Barcode Generator...
2/28/2020 9:04:55 AM • Symbol LS2208... • Answered on Feb 28, 2020
0helpful
3answers

What kind of fuse do I need for the symbol 4 slot battery charger

The UBC 2000 Fuse part number: 217005 (5A 250v Quick Blow), orderable from Little Fuse (Phone: 847-824-1188).
2/21/2020 9:11:58 PM • Symbol 4 Slot 4... • Answered on Feb 21, 2020
tip

IPhone Google Maps not Talking

On iPhone go to Settings. Scroll down to Maps and touch. Scroll down to Driving and Navigation and touch. Scroll down to Navigation and Voice Volume and ensure that Loud Volume is checked. Push the upper volume button on the side of the iPhone to max ring volume. But this is not all. Here is the secret, which it took me a long time to find out from an obscure post on the web. Open google maps and choose your location (location services must be on) as origin and some other place as destination. Touch Start (varies by screen, whether you have chosen the little angle arrow for directions or are on another screen -- no matter). Now here is the key part of it. Immediately after touching Start, push the volume up button on the side of the iPhone and keep pushing. A little volume symbol will appear on the screen with ascending bar, and you'll start to hear the voice. The problem is that the volume button works with google maps ONLY when the google maps voice is speaking (which happens for a very short time immediately after you touch Start, so you have to be quick). At other times the volume button controls ring volume, not map voice volume. Since you can't hear the google voice in the first place, you don't know when to push the volume up button to make it louder, and you can't change the volume unless the voice is speaking. The above procedure worked for me after I tried many other things and also heard from some sites that it was the new operating system that had disabled the maps voice, which is not the case. I am using an iPhone 5C with IOS 10.3.3. This may not work with other phones. Not responsible for errors or omissions. Your results may vary. Good luck to all.
on Dec 31, 2019 • Computers & Internet
0helpful
1answer

Hi there, does anyone has Fusion driver 2.0 for Symbol MC3090, since Id updated to Fusion 2.57.0.0.025B from Zebra webpage and from there on my wireless network didnt work. Thanks in advance.

a true relic, 16 years old for sure last one sold new 2011, support ended 2016 (missed the boat) 2004 first one. https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html what PC, name it and the OS, windows xp to w10., what? you posted to computers so..... it is a UPC bar code scanner , as seen in STORES check out. we have no idea what wireless network any one has, until told. my wild guess is you are not at home. only the maker support this old UPC scanner wireless wifi is

WLAN: 802.11a/b/g WPAN: Bluetooth only. and only if opted new. the manual states Windows Mobile 6.1 or Windows CE 5.0 device: no story told, found this in a dumpster or garage sale>? first time ever to attempt to get it to work? what is you host, A PC? or what? running what os The do not have drivers for most popular OS, sorry. and not now. all there is , is here. https://www.zebra.com/us/en/support-downloads/mobile-computers/handheld/mc3000.html#pageandfilelist_4c86

12/19/2019 1:20:26 PM • Symbol Computers... • Answered on Dec 19, 2019
0helpful
1answer

How to configure the Motorola MC9090 to prefix Data Stream Indicator? This is urgent,please help.

HTTPS is secure but not every website has an SSL certificate and if you try to visit a site over SSL that doesn't have a certificate you'll either get a 404 or a big fat warning
12/6/2019 5:25:21 PM • Symbol Motorola... • Answered on Dec 06, 2019
0helpful
1answer

I am trying to connect my Luxor smart tv to the internet over a wireless connection, there is an underscore in the network name but I cannot type one, I’ve tried holding the 0 button down on the remote because there is an underscore symbol on it but this doesn’t work, I even bought a new remote but still no joy. Do I need to get a keyboard?

most likely on the keyboard you get on the screen in the left bottom corner will be an alternative symbol option key if not you might have to change the bbid on the wi fi router and all your other devices connected to it by removing the underscore
10/5/2019 10:09:57 PM • Symbol Computers... • Answered on Oct 05, 2019
0helpful
1answer

How do i reset my

Does anyone know if the Symbol pdt 3100
Has gone flat if the data can be recovered ?
8/29/2019 6:58:52 AM • Symbol PDT 3110... • Answered on Aug 29, 2019
0helpful
1answer

I have a triangular symbol in the icon next to the internet symbol what is it

A screens hot of it would really help. And what Operating system and version are you running. These information will help the troubleshooting in solving the issue. hoping to hear from you soon, as I will love to render my assistance.
6/27/2019 10:28:09 AM • Symbol Computers... • Answered on Jun 27, 2019
Not finding what you are looking for?
Symbol Logo

2,422 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Symbol Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

Muzahura Frank

Level 3 Expert

2071 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...