The TV won't turn ON
i just replaced the power board got it off ebay.lj44-00025a.now the led 8004 turns red.
SVA EV-1703 Manual
You can use a laptop charger, as long as the connecter to the TV fits it'll work. I'm using one for my old set. I bought it from the Salvation Army for $5 without a power cord.
Hope this helps!
SVA TV will not turn on.
I've got old sva tv I was watching tv n went off then didnt com on any suggestions plz
1/5/2018 5:30:34 PM •
SVA-USA...
•
Answered
on Jan 05, 2018
My screen is black.
If the screen is black and the sound is working, it sounds like possibly one of your cables might have worked loose. I would check them all, and make sure no one accidentally took one off and put it in the wrong place (kids?) or maybe someone bumped into them and one is loose. Or, depending on how you have it all set up (there are ways to get sound without picture) it is possible your source is set incorrectly and you can still have sound.
1/3/2018 2:31:07 PM •
SVA-USA...
•
Answered
on Jan 03, 2018
Monitor Malfunction
you are a retired electronics service engineer and it has you beat --time to junk it as it must not be repairable
Wont turn on just makes a click like it is trying
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
3/27/2017 4:45:38 PM •
SVA-USA...
•
Answered
on Mar 27, 2017
Not finding what you are looking for?
