Sunpentown Electrical Supplies - Recent Questions, Troubleshooting & Support
Need start wheel
There are many generators made in china that use a generic Honda look-a-like motor. If your gen was made in china, good chance that there is an aftermarket starter assembly. Remove the starter and take it to your local small engine repair shop and ask them to try to match it up with another brand. If the starter is missing, take the generator to shop and ask them to look at mounting and starter cup. Good chance there is something out there that will work. If you have the starter assembly, small engine shop may be able to repair. If the starter rewind riveted to fan cover, take the whole fan comer to shop. Good luck
on Sep 12, 2011
How much gas to oil
Check for a crankcase with oil in it on the motor...if you have oil in the motor already then you do not need to mix it in the gas...
I am very sure that you will find this motor does not need the gas mixed...
Run straight gas... usually it is good to run Prem in small motors..
on May 21, 2011
TOOK CARB OFF TO CLEAN
the little spring should go through same holes as the linkage it's purpose is to take the slack out of the rod to keep the engine running smooth a broken spring will cause it too run erratically
on Jan 16, 2011
Not finding what you are looking for?