Sunpak Cameras - Recent Questions, Troubleshooting & Support

Google (sunpak)(4000)(manual) without parens OR request directly from Sunpak.

Sunpak Cameras | Answered on Jun 27, 2019


Sunpak Cameras | Answered on Apr 17, 2019

It should work automatically once connected properly, in case it doesn't work something is not right, obviously. Did you try it out with a different camera? That could help you in figuring out the problem.

Nikon D5200 PDF Manual Download

Sunpak Auto 422d... | Answered on Jun 24, 2018

When it is not triggering either Tube is dead or Trigger circuit has a problem. You can get junk flash from Ebay.

Sunpak Cameras | Answered on Dec 06, 2017

Found this on line. Hope it helps.

Sunpak 266D for... | Answered on Nov 11, 2017

This should be covered in the manual - it is probably an error message of some description.

Sunpak Cameras | Answered on Oct 30, 2017

Your manual is here

canon eos 40d manual Google Search

ISO settings are basically the way the camera responds to light. The higher the ISO, the more the camera will take low light images. The trade off though in higher ISO is that you get grain.

You can use any infra red or Bluetooth flash unit, but make sire you get on that lists your particular model. That way they actually work from the amount of light that hits the CMOS sensor inside the camera itself.

Flash units. Take a Look at Metz, they are the brand leader.

canon eos 40d remote flash Google Search

and this one

Amazon com Yongnuo RF603CII RF603II Remote Flash Trigger for Canon EOS 10D...

Sunpak 2000DZ... | Answered on Aug 29, 2017

IF you are working on them then you know the part number on the transformer. You may need to use Alibaba to see if the part is available in China.

Sunpak Auto 544... | Answered on Jul 31, 2017

For something of that age, repair may not be an option due to lack of spares. May be better to replace it. Be wary of using it on digital anyway, as the high trigger voltage may fry the camera's internal electronics.

Sunpak 622 Super... | Answered on Jun 16, 2017

Have you tried other flashguns ? Does this unit work on test ?

Sunpak Cameras | Answered on Nov 15, 2016

You need to set the flash to slave and the same channel as the master. If the flash doesn't have this function it may be able to be fired optically. Set the master flash to low power and set the off camera flash to optical.

Sunpak DigiFlash... | Answered on Mar 11, 2016

Not finding what you are looking for?
Sunpak Logo

194 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpak Cameras Experts

Paul Green

Level 2 Expert

527 Answers

Brad Brown

Level 3 Expert

18142 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30396 Answers

Are you a Sunpak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides