Sunbeam Food Mixers - Page 9 - Recent Questions, Troubleshooting & Support


try the link you may have to copy and past it in you web browser.http://davesrepair.com/pdfmanuals/mmmaintpage.htm

Sunbeam Food... | Answered on Jul 06, 2015


Nothing different between blenders working in US then Colombia. Your blender is defective. Bad luck you bought it in US and never tested before taking it to Colombia. Well, actually a blender can work with just one speed!

Sunbeam... | Answered on Jun 29, 2015


try ticking with a long screw driver. Metal tends to stuck but when knocked easily with another piece of metal it tend to loose.

Sunbeam Food... | Answered on May 22, 2015


try the following sites
www.eserviceinfo.com/equipment_type/model###
www.freeproductmanual.com/manufactures_name/model###
www.info.com/manuals
www.s-manuals.com/manufactures_name/model###

at the browser type the following information
sunbeam disassemble procedures for make/model ###

you could look at www.youtube.com/disassembling mixmaster model 2351

Sunbeam Food... | Answered on Mar 31, 2015


I hope this helps. I found on mine that the rear screw on the "neck" had become slighty loosecousing the release to not fully disingage. I had to remove the dome shaped cap in the middle of the speed control knob, pops off fairly easy, to gain access to the nut to tighten it. Hard part was trying to hold the screw head still while I used a small screw driver and small hammer to tap the nut tight, very limited space between the "neck" and motor body.

btsctn

Sunbeam 2346... | Answered on Feb 22, 2015


The normal procedure would be to take the appliance to a local Authorised Service Agent and get them to assess the problem. They will then obtain the parts for you if it is deemed to be a manufacturer fault.

Sunbeam Food... | Answered on Feb 12, 2015


I'm in the middle of a bake sale. Not a good time to send back. Also, I think you meant a free Upgrade at no additional cost...

Sunbeam 2346... | Answered on Feb 08, 2015


that is timer/capacitor... if under warranty - get it replaced, otherwise - you are ready for new one...

as you did not give type and model, i cannot even "questimate" if it is worth repairing or throw it directly to the rubbish bin, do not collect $200.00 just pay them...

general rule is that below $50.00 do not bother repair...

hope this short info will help you - do not forget to vote...

Sunbeam Food... | Answered on Feb 01, 2015


im not finding the model 7, maybe theres more to the model number. look here at the sunbeam page for manuals.
Mixers

Sunbeam Food... | Answered on Jan 27, 2015


I need clarification about this question.

Sunbeam Food... | Answered on Jan 18, 2015


Gently try to wiggle it out whilst pressing the button.

Sunbeam 2346... | Answered on Dec 09, 2014


Also check with an appliance parts supplier. They sometimes can find old parts or something that is interchangeable.

Sunbeam Food... | Answered on Dec 07, 2014

Not finding what you are looking for?
Sunbeam Logo

544 questions posted

Ask a Question

Usually answered in minutes!

Top Sunbeam Food Mixers Experts

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Bruce Showalter

Level 2 Expert

133 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you a Sunbeam Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...