Subaru Logo

Subaru Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 312 Products
  • 76K Answers

Where I live most auto parts stores will check and give you the error code which set off the check engine light. That will tell you the basic system which is setting it off. You can search of what other have done to repair for the error code.

Subaru Cars &... | Answered on Jul 04, 2020

The culprit fuse was under the hood - 20 amp fuse called "backup". Discovered nice cache of spare fuses and fuse puller tool in the under the hood fuse box.

2006 Subaru B9... | Answered on Jul 01, 2020

You would have a better chance location one if you use the year, make, model, and engine size information.

Subaru Cars &... | Answered on May 27, 2020

Make sure it gets gas; replace spark plug and apply chocke.

Subaru... | Answered on May 13, 2020

Common cause is a incorrectly tightened gas cap or defective pressure relief valve or seal in gas cap. Also a faulty purge valve or wiring to it and other small leaks. Go to the link for more info..

Subaru Cars &... | Answered on Apr 17, 2020

No - bleeding can be done well statically. Use a bleed tool to help get it right.

After complete - check vacuum lines to master cylinder for cracks or leaks.

Subaru Forester... | Answered on Apr 17, 2020

Car is not recognizin device..may need to flash computr. First unhook batt a fewmin w it installd then reconect and start car n let it relearn

Subaru Cars &... | Answered on Apr 17, 2020

Subaru Cars &... | Answered on Mar 21, 2020

you should be looking for a short to ground on the wiring that runs to the pump. 20 year old car it is very possible thats your problem.

Subaru Cars &... | Answered on Mar 15, 2020

Space saver wheel is reckoned safe and legal to take a car at greatly reduced speed to the nearest place where the puncture can be repaired or the tyre replaced. It is worth noting the recommended pressure and maximum speed is engraved on the sidewall of the space saver tyre, which is only suitable for normal road surfaces.

Subaru Cars &... | Answered on Mar 03, 2020

Little point assuming it should work without some meter work to ensure it is not only receiving power but is drawing enough current for it to become hot enough quickly enough for deicing duty.
I don't know how much current that should be but I expect 20 - 30 amps would be realistic, maybe more.

Subaru Cars &... | Answered on Mar 03, 2020

Subaru Cars &... | Answered on Mar 03, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Subaru Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14842 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides