Stoves Ovens - Page 4 - Popular Questions, Answers, Tips & Manuals
How do I fix the lights on the clock?
I don't think that the lights are repairable,it looks to me that they are part of the timer display and if this is the case it would not really be a diy job.
Ariston stove wiring cx 67s p6 x ng
When you replaced the burnt out selector did you notice any other damage? The selector switch may be connected to the energy input control. Most circuits have some sort of control, allowing only the right amount of energy to be put in. If this got damaged, the fuse would be inconsistent.
Elisa Jed '
http://www.atlasappliances.com
Unlock frigidaire professional series
Good Morning Anonymous, thank you for your post!
Based on the symptoms you are describing, it appears that your Frigidaire range is possibly locked. Typically, the "Door Locked" light will glow until the Self-Clean cycle has completed or the oven temperature has cooled. However, if the issue continues, please confirm that the Oven Control Lockout feature was not accidently selected (on some models). If so, you can cancel this feature by pressing CLEAR/OFF and hold for approximately 10 seconds. The control will unlock the oven door and resume normal operations.
If the instructions above do not solve the problem, may I please have your model number? The serial tag, which lists your model number, is typically located in the storage drawer, on the right side. With this information I can determine if your range is possibly experiencing other issues. Thank you - Z.
4/6/2014 3:39:59 PM •
Stoves Ovens
•
1,130 views • 0 helpful votes
Ovens spark up with gas and go out will not run
There is something wrong with your flame detection system... Try to clean the gap, sensor and the wires... If the wires all coated with grease, the grease will serve as a conductor and will short the circuit out so it will sense that there is no flame. If this still does not work out fine, try to see if the gap is set fine for the flame detection and there is no cut in the wire. Otherwise, you may need to change a little module called flame detection module.
7/7/2014 7:51:54 PM •
Stoves Ovens
•
67 views • 0 helpful votes
Not finding what you are looking for?