Sterling Watches - Popular Questions, Answers, Tips & Manuals

Try the videos. https://www.google.com/search?q=Sterling+%26+Noble+digital+clock+set+the+day ..

Unfortunately no, the only option is to remove the mechanical works and replace it with a quartz circuitry.

The serial number is usually engraved on the movement. If you open the back of the watch, you should be able to see it.

I looked at the Hamilton pocket watch site (in might be helpful if you visit the site, simply type "hamiltonpocketwatches.com" into your search engine and your will be able to examine photos of a number of movements).

The position and size of the number varies but it shouldn't take to long to find. One of the pictures I found impossible to see the number but the rest I found, although sometimes you had to look quite carefully.

Several solutions:

Needs cleaning is the best possible reason.

Broken balance due to being dropped is second.

r/
David

If your watches case does not have a hinge then pulling the crown out won't do anything but allow you to set the time if it is a stem set watch. If it is a lever set watch then the lever which is under the bezel will need to be pulled out before you can set the time.

On a pocket watch without a hinge the case back and or bezel will unscrew from the case.

Hope this helps,
Ken
Yellowstone Watch Inc.
www.yellowstonewatch.com

Pull the wind knob out...it takes a firm pull on mine. You will hear it click, then you have room to pull the movement out towards the hinge. Then close when done, and push the wind handle back in.

At one oclock the lever is pulled out about 1/4" then you can set the time, when finished, push the lever back in.

Hope this helps...george

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING and is harder to read especially in a jumble of words and numbers. 377, although a maker would be useful! https://www.google.com/search?q=battery+METAL+BEZEL+STAINLESS+STEEL+BACK+10%2F4312-13+75311+THAILAND+MOVT ..

https://www.fixya.com/support/r27181038-changing_watch_batteries Or risk it ..

Question edited for clarity. Armani and Emporio in wrong order. Quality Watch... Best advice https://www.fixya.com/support/r27181038-changing_watch_batteries The same as the one in it if it has one. Battery for Emporio Armani - GP A76 / LR44 / V13GA Coin cell (Amount 1)

Emporio Armani products - BatteryUpgrade

BatteryUpgrade https://www.batteryupgrade.com > ... > Emporio Armani .. If you got it on eBay, it is a Chinese copy https://www.google.com/search?q=Armani+Emporio+AR+0911 ..

1. Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
2. Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
3. Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
4. Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
5. Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
6. Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.

Question edited for clarity. Please don't type in all CAPS it is considered SHOUTING. No, they are gold plated. https://www.google.com/search?q=CANDINO+WATCH+10965 ..

If you've changed the batteries in your Bonaire Evap Cooling unit and you're seeing an error flashing up on the left-hand side of the display when you push any button, it could indicate a few potential issues: 1. **Incorrect Battery Installation**: Double-check that the batteries are installed correctly, with the positive and negative terminals aligned properly according to the markings in the battery compartment. Incorrect battery installation can lead to erratic behavior or display errors. 2. **Low Battery Voltage**: Ensure that the new batteries have sufficient voltage. Sometimes, even fresh batteries can be defective or have low power if they've been stored for a long time. Try replacing them with a different set of new batteries to see if the issue persists. 3. **Resetting the Unit**: Try performing a reset on the unit to clear any temporary glitches or errors. This can usually be done by unplugging the unit from power (or removing the batteries) for a few minutes, then plugging it back in (or reinstalling the batteries). 4. **Faulty Display or Control Panel**: If the error persists after trying the above steps, it's possible that there may be an issue with the display or control panel itself. In this case, you may need to contact Bonaire customer support or a qualified technician for further assistance or to arrange for repairs. 5. **Consult the User Manual**: Refer to the user manual or troubleshooting guide provided with your Bonaire Evap Cooling unit for specific instructions on dealing with error messages or display issues. The manual may contain additional information or troubleshooting steps tailored to your specific model. If none of the above steps resolve the issue, it's best to reach out to Bonaire customer support or a qualified technician for further assistance. They can provide expert guidance and help diagnose any underlying issues with your cooling unit.

It depends on the make. For some you need a pin press, and for others you use a small jewellers screwdriver. https://www.google.com/search?q=take+links+out+of+a+metal+band ..

Unknown make pretty much. Not available, so do it by the number of buttons. They are all made in the same Chinese factory. https://www.google.com/search?q=pod+501+watch+manual 4 button chronograph instructions https://www.google.com/search?q=4+button+digital+chronograph+instructions ..

Your question is .................................

Not having a maker and just an abstract number makes it hard. Everything can be found on Google. https://www.google.com/search?q=861237+watch The Search Query is simply 'make model value'. ..

Question edited for clarity. These are the most basic of watches with just a pull crown. For watches with the date, pull the crown to the first stop to adjust. To adjust the time, pull the crown to the second stop. If yours is this one, it looks like the 3 Chrono Dials are just for show as it has no buttons, (it would need an additional three button at 2, 7 and 10 on the dial). And it is only 30 bucks. https://www.boscovs.com/product/mens-geoffrey-beene-black-diamond-bracelet-watch-gbc0014gu/703960 https://www.google.com/search?q=Geoffrey+beene+gbc0014gu+watch+manual You could ask them direct? https://geoffreybeene.com/contact-us ....

With that style of watch you can go by the number of buttons. https://www.google.com/search?q=Helly+Hansen+Digital+Analogue+Water+Resistant+Watch+manual+pdf ..

Question edited for clarity, full 'make model (what it is)'. Question moved from Misc to Watches category. This tell you how to adjust every type of watch by the number of knobs and buttons https://images-eu.ssl-images-amazon.com/images/I/A1p6140C7yS.pdf https://www.google.com/search?q=WGS0002GD ..

Question edited for clarity. The battery needs replacing https://www.fixya.com/support/r27181038-changing_watch_batteries or for an extra $7 you could get a new one https://www.walmart.ca/en/ip/globlu-ladies-easy-read-two-tone-analog-watch-argent/6000195413206 ..