Speed Washing Machines - Page 9 - Recent Questions, Troubleshooting & Support

When the E4 error appears on your Aftron top-load washer, it usually means there's an issue with how the lid closes or locks. This error prevents the washer from knowing if the lid is shut tightly during use. * Ensure the lid is completely closed and latched. If it's not fully closed, the washer will not start. * Inspect the lid lock for any damage or blockages (e.g., dirt, debris, faulty latch) as these can prevent the lid from locking. * Power off the washing machine and unplug it briefly, reconnect the power and restart the machine, this reset may resolve the error. * Use a multimeter to check if the lid switch has continuity, this test will determine if the switch is functioning properly.

using the flat head screw driver firmly push the tip to the correct direction of the catch and the door would open

Errors TE, EC, TC mean that the temperature sensor that measures the temperature of the water in the unit is not working properly. Some codes - for example, TE - appear only before the start of the wash. These codes are typical of both ordinary washers and those that have a drying function.

https://www.google.com/search?q=Toshiba+AW+DK1700WMM+EL+error+code ..

The Door Safety Switch has failed and needs replacing.

Hi. Haas deluxe top load washing machine we got EU error code so what i need to do

Yes you must change ziner diode in maine power board..

If your Hisense top-loading washing machine is not washing but can spin out the water, it could be caused by a few different issues. Here are a few things you can try to fix the problem:

1. Check to ensure that the washing machine is properly loaded and balanced. An unbalanced load can cause the machine to stop working or not wash properly.
2. Check the water supply to the machine. Make sure that the water hoses are properly connected and that the water supply is turned on.
3. Check the detergent dispenser to make sure that it is not clogged. A clogged dispenser can prevent the detergent from being dispensed and the machine from washing properly.
4. Check the lid switch. If the lid switch is faulty, the machine may not wash but will spin out the water.
5. Check the water level switch. If the water level switch is faulty, the machine may not wash properly but will spin out the water.
6. If the problem persists, consider contacting Hisense customer service or a technician for further assistance.

It's essential to note that if the machine is not washing but it can spin out the water, it could be caused by a malfunction or damage in the water level switch, the timer or even the motor.

Question edited for clarity, full name of maker and add CAPS. Washing Machines Category is probably not the best place for this Wolfgang Puck Convection Oven. :>D There is ZERO support for Puck's Chinese products, except where people strip them for spares on eBay. They cover warranty and then nothing. Wolfgang has nothing to do with the items, he just gets commission on sales for having his name on them. https://www.google.com/search?q=wolfgang+puck+BTOBROO15+parts You can however buy them to pattern as they are all made in the same Chinese factory and sold to OEM manufacturers and also sold via many spares suppliers. Check out the huge selection in the link. https://www.google.com/search?q=oven+timer+control+knob&tbm=isch&ved=2ahUKEwjz7f349oCFAxXgwhQJHbioCucQ2-cCegQIABAA&oq=oven+timer+control+knob&gs_lp=EgNpbWciF292ZW4gdGltZXIgY29udHJvbCBrbm9iSMYpUKUMWK8jcAB4AJABAJgBXqABiASqAQE2uAEDyAEA-AEBigILZ3dzLXdpei1pbWfCAgUQABiABIgGAQ&sclient=img&ei=1dX5ZbOvOOCF0_gPuNGquA4&bih=919&biw=1920&rlz=1C1QJDB_enCA643CA644 ..

Have youtried contacting the store you bought it from or going directly to the manufacturer? These are a good starting point for part like that.

Dishwas machine

Your NOT suppose to "Program anything". Machines are kinda like people. After they work, they need "some" time to rest. Your machine (And Mine) all do this. Next time leave it alone, the minute will count down and it will automatically shut off. Question? You actually stood by the machine and watched the entire cycle? Was there another problem that motivated you to do this? Like your clothes were still wet or water still in the tub? If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

It would be innapropriate to recomend the removal of a safety device. I would repair it, not remove it.

Not a Washing Machine and too specialized for Fixya. There is nothing online regarding Error 3. Contact their Support phone line direct. https://www.mt.com/ca/en/home/service/support-and-repair/support.html https://www.google.com/search?q=mettler+toledo+FP90+error+03+error ..

A few possible causes: Blocked Water Level Switch: Most top-loading washing machines utilize a pressure switch to tell the water when to shut off during a wash or rinse cycle. If the tube becomes blocked with minerals from hard water or if the switch itself goes bad, the water will never shut off. Bad Water Valve: Valves at the points where the hot and cold water hoses enter your washing machine control the flow of water into the machine. If these valves become stuck open, or if their seals become lost or compromised, the water will continue to flow into the machine. Faulty Controls: The controls might fail to acknowledge the input from the pressure switch and never advance from one cycle to another. In some cases, this is a voltage problem, while in other cases the controls themselves are bad and would need to be replaced. If you've already cleaned and cut the ends of the tube going to the level sensor and the issue persists, it might be best to consult with a professional appliance repair service. They can help diagnose and fix the problem accurately. Please remember to turn off the water supply and unplug the machine before attempting any repairs.

That's coil sensor. Just replace it and you'll be back in business...

on a loader its most often fluids or leaky compresion masters or slaves or the distribution and or it need bleed or and filled etc {not easy} you need a tech it needs a fluids check could be just a bad filter...

Question edited for clarity and add CAPS.Unable to move from Washing Machines category, site error.The headlight lens kits that have wet and dry sandpaper and polish are effective as long as the plastic isn't yellow all the way through. The kits only remove surface oxidization and it sounds at though yours is bad all the way through. Invest 8 bucks in a new one for a fast and easy fix!New Lens$7.95 aftermarket lenshttps://www.lmctruck.com/1988-98-chevy-gmc/cd-1988-93-cargo-light-and-componentsGenuine spare part $31.00 CDNhttps://www.chevroletpartscanada-spc.ca/v-1990-chevrolet-k1500-pickup--wt--5-0l-v8-gas/body--cargo-lampsThere are also LED Lamps if you want more light.https://www.google.com/search?q=1990+chevy+k1500+extended+cab+cargo+lamp+cover..