Soundstorm Car Audio & Video - Page 4 - Recent Questions, Troubleshooting & Support

have you checked the ground

just do a manual search on the radio fm whilst the film is playing!

check all connections

If the amplifiers have RCA jacks, you can use an adapter cable to go from the headphone jack to the RCA inputs on the amp. If you're in the U.S., Radio Shack will likely have what you need.

I have had this problem before with mine. I found that it was one of the tracks I had on my flash drive was corrupt, I don't remember which track it was but if I plugged my drive in it would play until it got to that track and then it would just swith over to radio or cd. I had the same problem with a cd I had burned a bunch of MP3's on. If you erase your flashdrive, reformat it and then try saving songs to it again that should take care of the problem as long as you find out which file has the corruption in it and you don't put it back on your flashdrive.

Check out this link on Soundstorm's site - click the "Download" icon and select Open; it gives you your desired info as a PDF

200 X 4 does mean 200 watts times 4 channels. In other words each channel pushes out 200 watts. I believe u have a total output power of 800 watts but check with ur manual and if u do use that much power make sure you check for overheating, specially if its used for bass. Soundstorm amps cant take much of a beating so be careful.

Disconnect all speaker wires and signal cables from the amp. If it powers up, the wiring needs to be checked. If it still shuts down, the amp likely has blown output transistors.

Disconnect all speaker wires and signal cables from the amp. If it powers up, the wiring needs to be checked. If it still shuts down, the amp likely has blown output transistors.

you can you own sound but you have to eliminate the rare channels and use them for your self to conect the Subs and other stuff. Take care for the Power rating and just let the music play!!! Patrick

This is from the soundstorm website: If your DVD player shows a "Parental Code" on the screen. Here is the factory default code. It is 3308. Once you have this code, you can go into the settings and change the level to whichever level you like. Here is a break down of the levels: Level 1 = G Rated Level 3 = PG Rated Level 4 = PG 13 Rated Level 6 = PG-R Rated Level 7 = NC-17 Level 8 = Adult Level 0 = No Parental

Bad Ground.

Yes I would certainly say there is. Sorry to be the bearer of sad news but you have a short in them thar circuits! Its not a consumer replaceable part that you can open the unit and find a part thats bad and simply replace it. All these parts are soldered in and need a mutimeter at best to test the output and driver devices. It should be taken out and sent to the manufacturer or to a local audio repair center. Good luck

The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.

How to change language to english for Honda Odyssey 2021 Gathers Radio Player

I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.

First thing to do is check to make sure that the batteries are properly charged.

Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.

Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.

Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.