Sony Photography - Page 9 - Recent Questions, Troubleshooting & Support

Remove the battery

If you unjam the film, that will probably help. A quick look at Google shows multiple videos which may help you to diagnose and correct the error.

Plug it into what ?

Probably find there is no Win10 driver for it.

check out this video and product: https://www.youtube.com/watch?v=xtJx3j7AhQk https://www.ebay.com/i/173859792150?chn=ps Otherwise, there are only 1000 possible combinations ;)

if you have available online in your country....then search with model number....or go market and keep this frame with you and purchase it...

https://www.amazon.com/Replacement-PANDIGITAL-PI1051DWCB-PI1003DW-PI7000AW01/dp/B009H5T1SG

Stopped doing what ? If it stopped showing the pictures, check their size, rotation and format. If it powered off, check the batteries or mains lead.

The pin is normally a reset button. Your recordings should all be saved onto a small tft card which should secure itself into the cam by pressing it from the end until it 'clicks'. Removal is the opposite, so press it again and it should 'click' out

The pin is normally a reset button. Your recordings should all be saved onto a small tft card which should secure itself into the cam by pressing it from the end until it 'clicks'. Removal is the opposite, so press it again and it should 'click' out.

Usually means that either the film has not been exposed, or has been so grossly underexposed that the images do not register. Try firing the camera without film, but with the back open, and see if a) the shutter works, and b) the lens aperture opens and closes as it should. May need a service, which can be expensive.

I would try ebay. Check for sellers who sell serviced and reconditioned cameras. They will often have spares salvaged from cameras broken beyond repair.

Avoid cameras sold for spares or repair. This is often used as an excuse to sell junk, but not always.

A reputable seller who sells for spares sholud be able to tell you if a particular part is functional or not, and will refund if they turn out to be mistaken.

I'm sure you think you know what you mean - care to give the rest of us a clue ? Make and model of camera, at the very least, please.

Advertise

its a type of battery, 3v li-ion

The shutter wont fire till the film fully wound on to next frame. check for corrosion in battery compartment.

screen is dying, dead pixels.

turn on/off switch to off.

if its a pan and tilt tripod the rotate the arm sticking out to lock the tilt.

Have you contacted Oben? they may be able to help. https://www.obensupports.com/contact-us