Sony Logo

Sony Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15K Products
  • 476K Answers
  • 7M Views

As many as you want up to the ratings of the speaker.

Sony Car Audio &... • Answered 2 days ago


sony jst ripped us off with ps2. u know, always making something not perfect so they could sell a better product, does ps3 sound familiar. im sure something will be similar to ps3, then ps4 comes out, so on and so forth. mostly, i cant play rockstar games in my ps2, the video and audio doesnt match, then it jst freezes on loading scenes. jeeze.

Sony PlayStation... • Answered 2 days ago


Point the remote control at the camera in your cell phone. Press a button and see if you can see the LED flashing. If it doesn't the remote is history. If it does, then the sensor on the main board of the TV isn't working. You canbget parts here : TV Parts Universal TV Stands DLP Chips ShopJimmy

Sony Televison &... • Answered 2 days ago


Step 1: Download a third party program to record internal audio directly, because native recorder can only record audio from outer devices like microphones or headphones. Step 2: Launch the program then hit "start" button. Play the video at the same time. Step 3: After video finishes, hit the button again to stop recording. Step 4: Edit music tags like artist, name, album, cover, etc. Here are 4 tools for recording YouTube music in detailed steps: https://www.leawo.org/tutorial/recording-music-from-youtube.html?qa=1409

Sony Walkman... • Answered 3 days ago


Your symptom sounds like a damaged convergence IC.

There are two and large IC’s that control the convergence in a big screen set. They are secured to a very large aluminum heat sink. They will have a part number stamped on them that will start with an STKXXX-XXX, like STK392-110, and they are located on the signal board (on the left as you look into the back of the set).

I would recommend a low wattage soldering iron (45 watt) available at Radio Shack.

Along with the convergence IC’s there will also be some associated components that will need to be replaced as well. There are some resistors that are part of the convergence circuit that will be open and need to be replaced. Most likely these will appear charred in the center. If you have an Ohm Meter or a DVM, check all the resistors that are close to the IC’s and you should be looking for either ones that have opened or have changed values.
There are also two resistors on the front of the board located in the middle that are fusible link resistors, these should be checked for opens and replaced if they are found so.

I would suggest that you contact a service center in your area for a complete diagnosis and repair, as this type of repair can get a little tricky. But if you want to repair the set yourself, just remember to be careful. The capacitors and CRT’s can hold a charge and may shock you.


If one of the convergence IC’s are found to be bad, I would replace them both, if one has gone bad the other may go soon. I usually order my parts from Andrews Electronics in California, they will have the OEM components that you will need.
Their site is http://www.andrewselectronics.com/welcome.aspx
And their phone number is a 24-Hour Order Desk: (800) 274-4666
I recommend the phone order so you can talk to the person about the different types of IC’s that are available.

I would also advise that the convergence IC’s be OEM or better, just because they are cheap does not mean that they are a good deal. I have seen the cheap IC’s fail after a short time, even though they look exactly like the OEM IC’s. I think that the bottom line is that you will get what you pay for when it comes to the parts.

You can also try http://www.tvrepairkits.com/ , I have not tried them yet, but they do carry OEM or better parts.
Here is the part number for the kit, TV-KIT-2014 Price: $76.95 + $6.95 Shipping


I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up)
Please Note: If you cannot rate this post with the highest rating, then please do not leave any rating. I am doing this for free and I do not think that any rating other that the best is needed.
If you need further assistance please comment to this post and I will try to help you further.

Sony KP-53V90... • Answered on Jun 10, 2021


Hello Dear please purchase your required T Con from Alibaba or eBay Thanks M Nasir

Sony Televison &... • Answered on Jun 09, 2021


Update your fireware.
Pavtube Blu-ray Ripper is the best Blu-ray ripping software, is capable of ripping both Blu-ray discs and standard DVDs to your required HD or SD media formats.

Sony BDP-S300... • Answered on Jun 08, 2021


If you're connecting to your TV via a USB cable, then your phone can't differentiate between a TV usb connection and a PC usb connection. Either way, when you connect it, it's basically just hosting its files to whichever device you're connecting it to. Is your TV a smart TV? If so, there should be some way to access files on your phone, via the menu screen of the TV. Good luck!

Sony XPERIA M2... • Answered on Jun 08, 2021


Time to have it serviced at a Sony Authorised service department ..... or purchase a new one.

Sony Video... • Answered on Jun 07, 2021


Perhaps it's due to a bad speaker wiring, or a short where the wires connect to the unit.

Sony Audio... • Answered on Jun 05, 2021


First turn on device to be programmed. Press what device you want to program (tv) hold it down and at the same time hold power button down. Wait for red light to shut off and come back on. When light comes on remove finger device button and continue to hit power button on & off until device shuts off. Then hit stop button on the bottom off remote.

Sony Televison &... • Answered on Jun 02, 2021


cpu stands for central processing unit no idea where you find one but perhaps a dealer can order one from SONY

Sony Audio... • Answered on Jun 01, 2021


Here is what you have to do...
Completely shut down your psp and then turn it on while holding the R button and the Recovery Menu will come up. Go to Configuration and you should see the UMD Region option. By clicking X select your Region.
*This won't work for movies, only movies from your region code will play on the PSP

Sony PSP-3000... • Answered on May 31, 2021


remove the SD card insert into the SD slot in the computer Card Reader. Depends on the file format. What have you tried to view the video on? Take a look at page 53 of the user manual: https://gopro.zendesk.com/home IF you need a freeware Media Player I suggest VLC, it plays most formats and easy to use, at : http://www.filehippo.com/download_vlc_32/

Sony vaio... • Answered on May 27, 2021


Hardware solution: The easiest way to play different regions DVD on Mac is to buy a region-free player, however, if you've already got a nice DVD player, you can use hacks to turn off the region code in your DVD player. Note that hacking your DVD player region code is a violation of the DMCA and this is ******* in the United States. Software solution: If you live in the United States and you want a solution that will work on any DVD player but not to hack your DVD player, another best solution for you is to make a copy of the movie, although backing up copies of DVD is currently ******* in the United States, it will become available in the future. Then what you need to do is to using one of the popular ripping programs on the market, here, I would like to suggest you Free DVDAid, which enables you to make a 1:1 copy of the original DVD disc without quality loss with all audio streams and subtitle tracks well preserved. You will get a DVD that works that can work in any DVD player. Pavtube Free DVDAid

Sony BDP-S6700... • Answered on May 26, 2021

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sony Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

Brad Brown

Level 3 Expert

18686 Answers

Tom Chichester

Level 3 Expert

61782 Answers

Are you a Sony Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...