Smith Corona Office Equipment & Supplies - Page 5 - Answered Questions & Fixed Issues


try a new ribbon cartridge it that don't work it is most likely a bad hammer solonoid

Smith Corona... | Answered on Mar 28, 2016 | 182 views


could be the lid open or a bad lid switch or even a bad controle board

Smith Corona... | Answered on Mar 28, 2016 | 149 views


PDF]SMITH - CORONA STERLING

site.xavier.edu/polt/typewriters/SCSterlingManual1963.pdf
Your new Smith-COrona Sterling is a precision built writing ... ponents or when youhave occasion to change ... ble quick and easy it you follow instructions.

[PDF]Owner's Manual for Smith-Corona Standard Portables

sevenels.net/typewriters/manuals/Smith-CoronaPortablesManual.pdf
YOUR NEW SMITH-CORONA PORTABLE is the finest portable typewriter ... havemade Smith-Corona portable typewriters the ?rst Chain: of millions.

Smiths & Coronas - Sevenels.net

sevenels.net/typewriters/s-coronas.htm
See here for a quick-reference guide to Smith-Corona portable serial number prefixes. ... Download the manual for this typewriter here. Corona Four Serial # ... So why haveonly a fraction of these already rare sterling silver Sterlings survived?

Smith-Corona Sterling Manual Typewriter - YouTube

? 0:41
https://www.youtube.com/watch?v=gt9MsZWWHiE

Smith Corona... | Answered on Feb 04, 2016 | 287 views


with a small screwdriver open the clevis and reattach the link to the typebar

Smith Corona... | Answered on Jan 29, 2016 | 258 views


WD40 fixes everything. Turn it upside down and follow the L - Key from the top. Then follow it to the striker key. I can't remember if they have individual return springs. Been a long time :>)

Smith Corona... | Answered on Dec 28, 2015 | 214 views


most have a lever with the numbers 10, 12, and 15. others you go into format mode and make the selection there

Smith Corona... | Answered on Aug 29, 2015 | 127 views


Did you ever get a resolution to the added space problem? I just purchased an old Smith-Corona Super Sterling and it is doing the exact same thing.

Smith Corona... | Answered on Jul 27, 2015 | 241 views


Hello, . didn't see if you'd gotten other answers to your question. Quick history, worked on those when they were new. If your hitting a letter and getting more than one space you have a sticky escapement pawl. What this is, is a small device that makes out of the escapement track when a letter is typed. A older machine like this may have more than one problem. If it's been sitting for a Long time little things may pop up once in a while. Quick temp.fix. with the typewriter in fRont of you, tip it up so it's sitting on the back and you can see all the key levers. When you see what looks like a saw blade on the part that moves (the carriage), center the carriage, with your eyes look into the very bottom, with machine still on its back and hit a few keys you should see some small parts moving out trying too. Lightly spray with a lubricating penetrating oil. This will loosen and lube, but this is temporary unless you want to pay for an overhaul. Lots of words, hope it helps if not let me know, maybe I can try to draw something up.

Smith Corona... | Answered on Jul 11, 2015 | 192 views


hold the f and type the and type the character you want

Smith Corona... | Answered on Jun 25, 2015 | 196 views


manualslib

Smith Corona... | Answered on Jun 08, 2015 | 250 views


The SC typewriters need lubrication annually. If you have not lubricated it lately, it's time!

Smith Corona... | Answered on May 16, 2015 | 208 views


WE AT FIXYA ARE HERE TO HELP PEOPLE FIX THINGS,DOES ANY PART OF YOUR QUESTION INVOLVE FIXING SOMETHING?,NO,,WELL IT DOESN'T BELONG HERE THEN.

Smith Corona... | Answered on May 08, 2015 | 199 views


The ribbon, just pulls off of the carrier, if I remember correctly.

Smith Corona... | Answered on Apr 24, 2015 | 221 views


Try willrepairservice.com/Manuals.home or possibly fjaproducts.com/SearchMe/Department702

Smith Corona... | Answered on Apr 24, 2015 | 204 views


It could be a blown fuse, some models had a fuse right above where the power cord plugs into the machine. If you are going to take it our make sure the cord is unpluged from the wall outlet.

Smith Corona... | Answered on Mar 02, 2015 | 95 views


Remove the print wheel, look for bent spokes and be sure that the ribbon or correction tape are not tangled in it.

DickyO

Smith Corona... | Answered on Mar 01, 2015 | 65 views

Not finding what you are looking for?
Smith Corona Logo

Ask a Question

Usually answered in minutes!

Top Smith Corona Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

482 Answers

Ekse

Level 3 Expert

13434 Answers

James Keysor

Level 1 Expert

48 Answers

Are you a Smith Corona Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...