Smeg Ovens - Page 8 - Recent Questions, Troubleshooting & Support

The fan needs be cleaned and lubricated. To do this: Turn off stove/oven. Remove fan cover plate. Remove fan. Clean and lubricate the shaft bearings with 3 way oil. Install fan and cover plate.

Bulb is separate to the theremostat.

Hello Corlia; My name is Peter. I am a retired field service appliance technician in the USA. I do not know what country you are in, so go into your computer search engine and search, "Smeg Oven Parts SSA91MFP1". To purchase an entire oven door will be expensive. Just purchase to glass and install it yourself.

if its been this way I would suspect wiring. If it just started doing it - no idea.

http://www.smeg.com.au/smeg_au/docs/user_manuals/DOA330X.pdf http://www.stoveconnection.com.au/stgeorge/pdf.html Wiring Kitchen Oven Good Luck.

Hi,you have have probbably done this already but have you tryed unpluging it at the mains,sorry if you have already done this,all the best.

in cleaning a pyrolitic oven is suppose to lock the oven door , this is a safety feature due to fact that oven gets up much higher in temp than a normal oven , the heated air it produces if let out would flash burn anything in front of it to ashes (people,pets,rugs,etc.) the clock doubles as your display window to see what temp oven is at , there should be a clock selection to see current time of day even if oven is in use , and last but not least , it has a delay cleaning start feature , you can set it to come on and clean it's self , Id recommend not to use this feature for safety reasons (I don't think the mfg thought that feature out too much ) the door should remain locked till oven temp is below a preset minimum safe temp ,id not force it open for safety reasons

I have a Smeg Double Oven DO4SS-5 that I need to remove the control panel onit. I've removed the 2 bottom screws but is still reluctant to come off. Help please

You should be able to download a manual here http://www.smeguk.com/user-manuals/ Hope this helps :)