Smeg Dishwashers - Recent Questions, Troubleshooting & Support

0helpful
3answers

Hello. I have an error 24 on my smeg dishwasher,model cw511mdaus-2. what is the error?how to reset machine,thank you. cheers Andrew

This is a commercial unit it error codes are different Er 24 Boiler temperature probe Boiler temperature probe disconnected or not working malfunction this is in the user manual
8/30/2021 7:47:08 PM • Smeg Dishwashers • Answered on Aug 30, 2021
0helpful
1answer

E3 Error

the E3 error is a result of water temperature not getting to a nominal value within a particular time. This could be caused by several factors like heater faulty, wash pump not working well, wash arms not circulating water as required. Need model number to help you further pin point if possible. Refer this site for 60 inch dishwasher and this site for 45 inch ones.
2/4/2020 8:25:35 PM • Smeg Dishwashers • Answered on Feb 04, 2020
0helpful
1answer

My smeg dishwasher runs a cycle for about 5mins then bleeps to say it’s finished.. then drains.. it doesn’t even run kind enough to release the tablet.

Sounds kinda funny but try unplugging they dishwasher for about 3 minutes where there's no power running to it. The plug should be underneath your sink. Then plug it back in and turn it on and see if it will cycle
8/19/2019 9:18:32 PM • Smeg Dishwashers • Answered on Aug 19, 2019
0helpful
1answer

I have a smeg DWA157X dishwasher and the drain pump wont stop. i have checked the float under the system and all seems fine. is there a sensor in the machine that might be faulty?

Sounds like a control board issue? Turn it off I mean at The breaker or unplug it wait about an hour for the board to clear if it doesnt replace board.
5/22/2019 5:41:36 AM • Smeg Dishwashers • Answered on May 22, 2019
0helpful
1answer

I need a manual for smeg sa626x

I've found it herehttp://e.manualretriever.com/lect.php?ID=5190046&lg=E&h=d41d8cd98f00b204e9800998ecf8427e&src=15I know the answer was a little late, but I Hope it helps others looking for it
3/7/2019 3:46:11 AM • Smeg Dishwashers • Answered on Mar 07, 2019
0helpful
1answer

SMEG Dishwasher DWAU149x wont run program? drains and refills then nothing. I have checked Aquastop, inlets and outlets. Nothing in pump either... Any ideas?

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights. When it stops, what light are on?
1/11/2019 5:42:07 PM • Smeg Dishwashers • Answered on Jan 11, 2019
0helpful
1answer

Smeg dishwasher DI 612 CA no fault codes, all the proramme lights work but it will not stop pumping out the waste tank.

SOUNDS LIKE ITS HAD A LEAK AND TURNED ON THE ANTI FLOOD PUMP TREVOR, TRY UNPLUGGING AND TILT THE MACHINE TO REMOVE ANY WATER LYING ON THE BASE PLATE
12/24/2018 4:15:10 AM • Smeg Dishwashers • Answered on Dec 24, 2018
0helpful
1answer

I have a SMEG DWAU314x1 and for some reason the door will not shut. It worked fine yesterday and I have checked for any obstructions and there are not any.

Make sure silverware, broken glass, etc isn’t wedged around hinges.
11/6/2018 12:27:27 AM • Smeg Dishwashers • Answered on Nov 06, 2018
Not finding what you are looking for?
Smeg Logo

710 questions posted

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

Brad Brown

Level 3 Expert

18861 Answers

john h

Level 3 Expert

25748 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

41724 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...