SMC Computers & Internet - Page 4 - Recent Questions, Troubleshooting & Support

you can find the answer in below link http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/12040-pswdrec-2900xl.html

Damaged usb port? See if contacts are bent. Bad wifi adapter is possible. Try another wireless device in the port (mouse, keybd) to see if port is okay. Some adapters require that you install software before using, but this should not cause reboots.

disable firewall

You can access the SMC2870 without a driver, you just need to plug into the Ethernet port. The default IP address is 192.168.2.25 and the manual is here. SMC Networks SMC2870W User Manual Network Settings

Ask a question.

Click the 'Start' orb, type in msinfo32 and hit Enter. On the left, expand the Components section, then click on Problem Devices On the right, find the wireless card and its Hardware ID (PNP Device ID)... select it, then click Edit->Copy Paste that into google and edit it down to the PCI\VEN_xxxx&DEV_yyyy part, add a space and the word driver, then search.

Click the 'Start' orb, type in msinfo32 and hit Enter. On the left, expand the Components section, then click on Problem Devices On the right, find the wireless card and its Hardware ID (PNP Device ID)... select it, then click Edit->Copy Paste that into google and edit it down to the PCI\VEN_xxxx&DEV_yyyy part, add a space and the word driver, then search.

Click the 'Start' orb, type in msinfo32 and hit Enter. On the left, expand the Components section, then click on Problem Devices On the right, find the wireless card and its Hardware ID (PNP Device ID)... select it, then click Edit->Copy Paste that into google and edit it down to the PCI\VEN_xxxx&DEV_yyyy part, add a space and the word driver, then search. That should find drivers for the base chipset on the card, rather than only for the SMC version of the card using that radio/chipset.

If it's WEP, try entering it as HEX instead of ASCII.

Kies is software to access your Samsung device... why does this question reference an SMC USB 11g WiFi adapter?

Is WiFi enabled on the router?

Is not compatible with linux. But here are somr tested: 1

Medialink - Wireless N USB Adapter - 802.11n

AirLink101 AWLL6075 Wireless N Mini USB Adapter

ASUS (USB-N13) Wireless-N USB Adapter WifiDocs WirelessCardsSupported Community Help Wiki ->LINUX

update the wireless drivers for your network card. also check the spec sheet for your wireless card and make sure it's compatable with your OS and system. If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_d799f810c7212a78