Simpson Washing Machines - Page 3 - Popular Questions, Answers, Tips & Manuals

check for a a broken bracket

that is how diyers learn what not to do .

Gearbox or Clutch is failing.

check and test water level switch

No reset button on Simpson 39p400m

https://www.simpson.com.au/globalassets/user-manuals/sman_22s750m_22s950m-2.pdf

https://www.google.com/search?q=ERROR+CODE+SF+ON+A+SIMPSON+WASHING+MACHINE&oq=ERROR+CODE+SF+ON+A+SIMPSON+WASHING+MACHINE+&aqs=chrome..69i57.14853j0j7&sourceid=chrome&ie=UTF-8

E17 is Machine goes out of balance or vibrates excessively when spinning. Make the machine level Adjust feet to touch the floor Redistribute clothes evenly.

Its possible but difficult. You will need to drill a small hole down the middle of the snapped off bolt and use a correct size "easyout" which is a special reverse threaded stud which goes into the hole and unscrews the snapped off bolt.

E30 is a Water level problem Wait, this fault may clear itself. If not, touch the PROGRAM SELECTOR to Drain & Spin then touch "Start/Hold Pause" button to drain the wash bowl.

your lid switch may be stuck its a simple fix to bypass it

not exactly the same model but on page 13 it shows you how to remove the lint bag https://www.simpson.com.au/globalassets/user-manuals/sman_ezisensor_feb12_omo.pdf or https://www.youtube.com/watch?v=uEFvii19Q_Q

https://www.simpson.com.au/globalassets/user-manuals/sman_tlw_dec16.pdf

E17 means the machine has gone out balance. Normally, if you untangle the clothes and shut the lid, it will start again. If it doesn't, it may have damaged the out of balance lever under the top of the cabinet. It may also mean that the clutch has failed and the machine is only washing in 1 direction. This will tangle the clothes and cause it to go out of balance every load. Have a look under the machine, if there is black / brown oily stains all over the bottom of the cabinet, it is almost certain the clutch has failed. In most cases, its cheaper to buy a new machine.

You will have to tip that unit back to get under it and remove the drain plug on the pump and check the pump and filter for debris. Get ready for lots of water to come out

BEFORE CALLING A TECH....VISIT WWW.REPAIRCLINIC.COM FOR CODES THIS MAY HELP SAVE A SERVICE CALL

The lights that flash correspond to the cycle selected, all the lights for the user functions are the ones that flash. The orange LED just flashes 00:00.

Always disconnect power & turn off water before doing any work. This is the simple fix for Error code E20Simple fix to this problem with out having to buy another controller board.Carefully remove back cover &Make a lite adjustment to the electronic pressure sensor turn with Philips driver 45 deg clockwise to raise water level by 25mm will fix the pump running all the time & will spin now.

there is probably something stuck in the pump thats jamming it,remove pump and check inside if nothing then bench test pump,if good a broken wire in the loom