Simpson Washing Machines - Popular Questions, Answers, Tips & Manuals


E30 is a Water level problem
Wait, this fault may clear itself. If not, touch the PROGRAM SELECTOR to Drain & Spin then touch "Start/Hold Pause" button to drain the wash bowl.

Simpson Washing... | 1,035 views | 0 helpful votes


Its possible but difficult. You will need to drill a small hole down the middle of the snapped off bolt and use a correct size "easyout" which is a special reverse threaded stud which goes into the hole and unscrews the snapped off bolt.

Simpson Washing... | 69 views | 1 helpful votes


E17 is
Machine goes out of balance or vibrates excessively when
spinning.
Make the machine level
Adjust feet to touch the floor
Redistribute clothes evenly.

Simpson Washing... | 61 views | 0 helpful votes


your lid switch may be stuck its a simple fix to bypass it

Simpson Washing... | 39 views | 0 helpful votes


Always disconnect power & turn off water before doing any work.
This is the simple fix for Error code E20
Simple fix to this problem with out having to buy another controller board.
Carefully remove back cover &
Make a lite adjustment to the electronic pressure sensor
turn with Philips driver 45 deg clockwise to raise water level by 25mm will fix the pump running all the time & will spin now.6f8f5c14-d68f-460d-b385-f6fdf5e0c6b3.jpg

Simpson Washing... | 738 views | 0 helpful votes


E17 means the machine has gone out balance. Normally, if you untangle the clothes and shut the lid, it will start again. If it doesn't, it may have damaged the out of balance lever under the top of the cabinet. It may also mean that the clutch has failed and the machine is only washing in 1 direction. This will tangle the clothes and cause it to go out of balance every load. Have a look under the machine, if there is black / brown oily stains all over the bottom of the cabinet, it is almost certain the clutch has failed. In most cases, its cheaper to buy a new machine.

Simpson Washing... | 803 views | 1 helpful votes


BEFORE CALLING A TECH....VISIT WWW.REPAIRCLINIC.COM FOR CODES
THIS MAY HELP SAVE A SERVICE CALL

Simpson Washing... | 33 views | 0 helpful votes


You will have to tip that unit back to get under it and remove the drain plug on the pump and check the pump and filter for debris. Get ready for lots of water to come out

Simpson Washing... | 141 views | 0 helpful votes


Google (simpson)(750)(manual) without parens.

Simpson Washing... | 101 views | 0 helpful votes


Might call number in free manual to see if they can assist you.

Brand new machine should have warranty or guarantee to be serviced or replaced or a refund issued.

https://www.winningappliances.com.au/public/manuals/SWT6055TMWA-Simpson-Product-Manual.pdf

Simpson Washing... | 43 views | 0 helpful votes


there is probably something stuck in the pump thats jamming it,remove pump and check inside if nothing then bench test pump,if good a broken wire in the loom

Simpson Washing... | 42 views | 0 helpful votes


is the water draining out,if not blocked or faulty drain pump

Simpson Washing... | 46 views | 0 helpful votes

Not finding what you are looking for?
Simpson Logo

685 questions posted

Ask a Question

Usually answered in minutes!

Top Simpson Washing Machines Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

STEVE

Level 3 Expert

34142 Answers

Kardoc

Level 3 Expert

5476 Answers

Are you a Simpson Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...