Siemens Lands Phones - Popular Questions, Answers, Tips & Manuals
GIGASET C300 Phone not working properly?
Question edited for clarity.
Question moved to Gigaset C300.
You need to do a power reset. Do the following in this order.
Remove the phone plug from the wall jack.
Remove the handset and remove the batteries.
Unplug the power adapter from the mains plug.
Put the batteries back in the handset observing polarity.
Plug the telephone line jack back in.
Plug the wall adapter back in.
It should now be reset.
Page 34 refers to deleting SMS Messages. You know these are TEXT Messages and NOT Answer Machine Messages?
http://gse.gigaset.com/fileadmin/legacy-assets/A31008-M2203-Y701-2-7619_en_SGP.pdf
..
I had switched off my Gigaset C200 for one week
YOU SHOULD HARD RESET THE UNIT
When restoring factory settings:
u Handsets are de-registered
- When resetting via the menu:
all Gigaset handsets
- When resetting using the key on the
base station: also all handsets of
other GAP capable devices
u Individual settings are reset
u All lists are deleted
u The system PIN is reset to the original
code 0000
u Eco Mode+ is deactivated
Only the date and time are retained.
Resetting the base station via the
menu
₪ Settings ₪ Base ₪ Base Reset
§Menu§
§OK§
Press the display key to confirm
SIEMENS Gigaset C380 User Giude Restoring The Base Station To The Factory...
I think my Gigaset S675
There is a strong possibility the BT Hub3, unit is bad either out of box or first 6 months of use.
Solution contact seller for exchange.
How do i fix my landline phone?
hmm im not sure if there's an issue with the base for your wireless phones but it maybe that the phones arent able to determine if the base is active (EG the right base for the phones) some may need to be paired up to the base or the base maybe malfunctioning due to the lightning storm (Phone lines are prone to being struck at times which could send a surge to some types of phone bases and ruin them)
HELLO EVRY BODY,
We have a
Hi,
First of all you have to change the Dialing mode, DTMF or Pulse, according PABX type, ask to technicians!
Second step is to set up the Flash Time from 80 to 800 ms, again in dependency of your PABX Operating Instructions. Cheers and good Luck.
No ring on gigaset phone
1st step check in supply units - 110/230V AC to 9.5V AC adapter for base station.dd
2nd step check in ringer volume (ring tone) if the rank is zero (0) ringer is off and afterward change to wish-able ringer volume 1-5.
Not finding what you are looking for?