Shuttle sn - Recent Questions, Troubleshooting & Support

It would seem as if you have got 2x512mb sticks and not 2x1Gb sticks. There is no setting in the BIOS that will change how your system sees your RAM sticks. RAM wasn't made at the 333Mhz speed in 1Gb sticks, it was the expensive end of the market and so was usually only available in the highest speed range for business and industry.

You might want to look at the RAM and the power supply.

Restart your computer During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key this will vary depending on your computer and operating system Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart hope this helps

power off 1st..then open ur cpu ..check ur ram ...and clean it....or mother board is not work replace near hardware shop....or check ur bios bettery or change it

Here is a link to a site that really covers power supplies quite thoroughly. http://www.motherboards.org/articles/guides/1487_6.html

Hello,Even though your system was built around the AMD 64-bit processor, the componets are still 32-bit hardware. Windows 7 is a 64-bit based os. You can perform a windows update to try to download the latest drivers for your system. Also, visit Shuttle support website for more information about Window 7 drivers. Worst case scenero, reinstall Windows XP/Vista. Good LuckC2Solutions Support Team

the power supply could still be bad or you might have a short somewhere make sur everything is seated properly

Check with your local computer store. Get a virus protection program.

Realtek 8201BL chipset is the network drivers you will need. You should be able to find this online. When you do download the drivers, be sure to download the 64 bit drivers for your systems or you will run into further problems.

Good Luck
Franklin

Follow this link to the drivers for your computer.

http://global.shuttle.com/download03.jsp?PI=89

If it's a new build, can you give details on processor etc. But if there is no bios, it's normally a memory incompatability problem, or the processor isn't active.

check if the cables that connect the front USB to the motherboard are connected properly. They might just have gone loose.

If this was damaged 'In Transit' contact the company you bought it from and they may be able to supply you with a replacement. The damage was possibly due to bad packaging at their end or damage while the delivery company had it.

Contact Shuttle directly to request the manual.

Here is the link to the English manual:
http://eu.shuttle.com/download/Archive/Manuals/en/mv43p_n/mv43pen.zip

Here is the link to all downloads for this product:
http://www.shuttle.eu/_archive/older/en/mv43_faq.htm#download

It seems that you have a shuttle board and you can download the audio driver at http://eu.shuttle.com/archive/en/mv43n_faq.htm#download