Sharp Logo

Sharp Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 4K Products
  • 124K Answers

The TV would be factory set to the country of origin, you cannot change this on the TV.

Sharp Televison... | 36 views | 0 helpful votes

We are North American, so only deal in English, here it is.

Good evening? all, I have a Sharp MX-M354N machine I changed? the heating roller but a code prevents me from working. L4-L35

ici la


Sharp Computers... | 33 views | 1 helpful votes

Check the "Main Power" to ensure it is on. Locate the button on the top of the television among the "Volume" and "Channel" buttons. ... If the "Main Power" button is off the remote will not turn on the television. Wait to see if pressing "Main Power" will activate the TV.

Sharp Televison... | 24 views | 0 helpful votes

Using an electrical tester will determine the cause within a short time.

Sharp Microwave... | 26 views | 0 helpful votes

Make a note of the generic part number on the screen label and look on fleabay or order one from an authorised Sharp Electronics Service Centre.

Sharp Televison... | 22 views | 0 helpful votes

The fix might be cheap, or it might be expensive. I've gotten two older LCD tvs that did something similar. Both were a common problem with the model and make. They both needed a small capacitor replaced on the main board. The one that needed replacing had burst, and it simply had to be soldered out, and a new one put in. Worked easy, but you need to be comfortable taking the TV apart to find out. Generally by control board, the power light blink number is part of a diagnostic for a repair person. you might be able to type the specifics into Google , model, number of blinks, what color... and find the issue. If it is a power supply, it might be a 50-80$ part. If it is a capacitor, probably would cost less than $5 with shipping from Ebay. Get the info together and call a local repair shop, as long as the screen isn't damaged, it's probably cheaper than buying another one.

Sharp Televison... | 19 views | 0 helpful votes

Here is your best advice, no one likes it, but it is the best advice you will get!

From a previous post, we see about 60 like yours a week!

Yes, that never fixes the problem. This explains why, and why you can't diagnose television problems on an online forum. The television sections are really only for help with manuals and remote codes.

Here are similar questions that we see often.
I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ? Or

Turns on and sound works fine, but the picture is distorted (solarized? polarized? not sure what the term is) I replaced the main board, but that didn't fix it.

I have an LG 55LM6200-UE with a dim lower-left. I just replaced both LED strips with no resolution. There is no physical obstruction visible, so this has to be a cable or board problem, right?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work as it should! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what it does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part you put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'NO Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous sellers use it as an excuse to get money for selling items that may, or may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $5 in parts and a couple of hours labour. It's not the fix you want to hear, but it is the best advice.

Andrew - Fixya Moderator

Sharp Televison... | 37 views | 0 helpful votes

Sharp Televison... | 39 views | 0 helpful votes

Just want to comment on few general things, the website style is perfect, the written content is really great, i want to show you something: and more info is here:

Sharp Televison... | 35 views | 1 helpful votes

Sharp Video... | 19 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76352 Answers


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides