Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 124K Answers
  • 3M Views

im not sure but could it be a comparability issue with the device and the wake up signal from the device to the tv? android systems use a Linux based file system, so the problem may be in the tv's input settings. hdmi input from the device to the tv. and then go to tv input mode and see if putting the device in another hdmi port doesn't work.

Sharp Aquos... | Answered on Dec 30, 2019


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sharp Aquos... | Answered on Dec 28, 2019


Use code search to find something that works. If a search through all codes stored in your Newstar URC fails, try a different one.

Sharp Televison... | Answered on Dec 27, 2019


Ol?
observa??o:
algumas TVs mais recentes n?o possuem as entradas de v?deo "amarelas" tradicionais, conhecidas como conex?o "AV". Mesmo sem essa entrada, voc? pode usar o cabo AV padr?o de 3 cores fornecido com o console.
O que fazer:
procure as entradas "componente" na sua TV. Essas conex?es t?m uma linha de entradas de cinco cores diferentes (verde, azul e vermelho para v?deo, branco e vermelho para ?udio). Se voc? possui mais de um grupo de entrada de componentes, geralmente ? o primeiro grupo que trabalha com cabos AV padr?o. Procure o grupo que possui a entrada verde com um contorno amarelo ao redor ou a palavra "v?deo" logo acima ou abaixo da entrada.
Ligue a ficha amarela do cabo Wii AV ? tomada verde "Y". Conecte o plugue branco ao ?udio "L" e o plugue vermelho ao ?udio "R". N?o conecte nada ?s entradas azul e vermelha (v?deo).
Conecte seu console Wii e ajuste seu canal de TV ? sele??o de entrada que voc? est? usando.
Se estiver visualizando a imagem do Wii em preto e branco, tente o seguinte para v?-la em cores:
Altere os canais e insira sua TV v?rias vezes at? encontrar a que ter? a imagem colorida (geralmente pressionando a tecla "Sele??o de entrada" ou " Fonte "no controle remoto da TV mudar? as op??es).
Se voc? tiver a imagem somente em preto e branco, pode ser necess?rio alterar a configura??o de sele??o de entrada do sinal componente para o padr?o AV. Isso pode ser feito da seguinte forma:
Na op??o de menu na tela. Essa op??o geralmente ? acess?vel usando o bot?o "Menu" no controle remoto da TV.
Um bot?o no controle remoto que alterna os sinais padr?o e de componentes. Estes podem ser nomeados "AV" ou "V?deo".
Nota: TV Sharp Aquos Quattron (4 cores):
Alguns modelos de TVs Sharp Aquos Quattron possuem uma entrada de miniplugue, como um fone de ouvido, para conectar o cabo AV padr?o. Existem duas maneiras de conectar o console Wii a essas TVs:
Adquira um adaptador que permita que os cabos AV padr?o sejam conectados ao miniplugue na parte traseira da TV. Eles geralmente est?o dispon?veis no site do fabricante.
Ou, como alternativa, voc? pode comprar os cabos componentes para o seu console Wii.

Sharp Televison... | Answered on Dec 24, 2019


Hi
What error code does the printer gives you? without the code I cannot help you 'cause the causes could be hundreds...
Best regards

Sharp Office... | Answered on Dec 23, 2019


SORRY NO CLUE HERE TRY SHARP WEBSITE

Sharp Office... | Answered on Dec 20, 2019


Hello,

The reason your television keeps popping up the menu is simply because, either the remote or the televisions menu button is stuck.

To test if it is the remote, remove the battery from the back of the remote and try to operate the television from the buttons on the television to see if it works, if it pops up, then it means the problem is not from the remote and its from the television.

Either ways you have to open the remote and clean the panel with naphthalene, then adjust the menu button on it. or you can as well get a new remote for your television if you cannot clean it on your own.

Also to fix the television if it is detected as the fault, get the appropriate screwdriver, open up the television, then try to locate the menu button, then you adjust it and try to operate with either the remote of the menu key on the television.

Once it is seen to be working, ensure that the television is properly coupled back.

Always make sure the keys on the coputer and the television are not pressed too hard.

Take care

Sharp Aquos... | Answered on Dec 17, 2019


This procedure may help, it works on older models.
Press # key
press * key
press C key
press * key
enter 16
press start key
Turn the machine off and then back on
Good luck

Sharp MX-2700N... | Answered on Dec 14, 2019


You may change the video resolution and the video format with the help of the iDelashare VideoGo

Sharp Aquos... | Answered on Dec 12, 2019


Could be an open internal fuse or power supply failure

Sharp LC... | Answered on Dec 10, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76376 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...