Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 124K Answers
  • 3M Views

Maybe its anothr issue...chec utube or repairbooks in library

Sharp Televison... | Answered on Jan 10, 2020


the only proper way is to remove the rear cover and resolder the connector back on the circuit board my advise is to get a tv engineer to fix it for you or you can use a differant input ie.scart or hdmi etc.using a set top box or a dvd recorder or similar using the tuner within that hope that helps you

Sharp Televison... | Answered on Jan 10, 2020


There probably is a fuse inside but replacement depends upon your degree of comfort with disassembly while maintaining awareness of the dangerous voltages lurking inside.

Sharp Insight... | Answered on Jan 08, 2020


go into set up and change input or source then see if audio is ok and speakers are on

Sharp Televison... | Answered on Jan 06, 2020


refocus the lens. You are using twice the correct focal length, which is reversing the image.

Sharp Audio... | Answered on Jan 05, 2020


Hi I need help in turning of the timmer from my sharp stereo because it's not turning on and I don't have any remote for it what can I do
1_4_2020_2_33_38_am.jpg

Sharp Audio... | Answered on Jan 04, 2020


TRY THIS- press menu button and put the numbers 1147 in..A NEW BOX WILL POP UP and in the box that comes up PRESS THE FIRST OPTION it was the top one on my sharp tv...the tv will then go off ...using your remote turn the TV back on...you will then go through the set up as you did when it was new...SORTED NO MORE YELLOW K, Just done this myself after advice on the phone from Tesco tech support

Sharp Televison... | Answered on Jan 03, 2020


im not sure but could it be a comparability issue with the device and the wake up signal from the device to the tv? android systems use a Linux based file system, so the problem may be in the tv's input settings. hdmi input from the device to the tv. and then go to tv input mode and see if putting the device in another hdmi port doesn't work.

Sharp Aquos... | Answered on Dec 30, 2019


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sharp Aquos... | Answered on Dec 28, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76365 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...