Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 124K Answers
  • 3M Views

You can try getting it professionally cleaned but it sounds like you need a mechanism unit and that exceeds the cost of a new bluray player substantially. Make sure you have gone into the menu and under software update there is system reset. Make sure you have completed that system reset and make sure you have the latest software update installed. Sometimes after playing a movie you have to complete that system reset in the menu and the reset whereby you hold down the power button ON THE UNIT ITSELF NOT ON THE REMOTE CONTROL until the unit says reset.

Sharp AQUOS... | Answered on Feb 21, 2020


i have a sharp photocopier AR-5316 flashing error code is E7 how to reset this code and solve the problem

Sharp AR-5316... | Answered on Feb 17, 2020


As it's less than a year old the manufacturer's warranty should still apply.

Your player probably has a failed laser head unit; if you have to pay to fix this fault then you'd be better off just chucking it away and buying a replacement as it will be cheaper.

Sharp AQUOS... | Answered on Feb 17, 2020


huh?
can your form a real question or even tell what this computer is.?
seems to me it is a printer, from SHARP. (rare here in USA)
https://sosnfl.com/sharp-mx-m464n-error-codes/

why not get the manual from SHARP and read the error pages,
that be step 1. even keep it handy for next time. there will be a printer failure, nothing made is worse, for that printers.

Sharp Computers... | Answered on Feb 15, 2020


What if copier show L1

Sharp Office... | Answered on Feb 15, 2020


https://www.google.com/search?sxsrf=ACYBGNT4NAFE4i8H_nUJo3tW8_UkuhgWQA%3A1581700574106&source=hp&ei=3tVGXvD-A8GblwSFiomADA&q=My+sharp+mx+5001n+jam+in+printing+colour+and+photocopy+but+does+not+jam+in+printing+and+photocopy+of+black&oq=My+sharp+mx+5001n+jam+in+printing+colour+and+photocopy+but+does+not+jam+in+printing+and+photocopy+of+black&gs_l=psy-ab.3..35i362i39l10.2711.2711..4155...2.0..0.0.0.......1....2j1..gws-wiz.....10.Do72nUXxrmc&ved=0ahUKEwjw5e7mxdHnAhXBzYUKHQVFAsAQ4dUDCAU&uact=5#kpvalbx=__91GXtj_OIusa-e2q-gM31

Sharp Office... | Answered on Feb 14, 2020


Try cleaning the bottle out with soapy water.

Sharp AL 1215... | Answered on Feb 13, 2020


Man mean maintenance signal.
Reset : # - Interrupt - C -interrupt press 14 press start key.
If you are not fix try next way.
# - Interrupt - C -interrupt press 16 press start key.

Sharp AR-5320... | Answered on Feb 13, 2020


try pressing *,#,0,#, 24,2,yes or 1 to reset developer light (circle of dots) Then 20, yes or 1 to reset the little man light.

Sharp Office... | Answered on Feb 13, 2020


I earned $5000 ultimate month by using operating online only for 5 to 8 hours on my computer and this was so smooth that i personally couldn't accept as true with before working on this website. if you too need to earn this sort of huge cash then come and be part of us. do this internet-website online ...........
Here : http://www.Neway9.com

Sharp Office... | Answered on Feb 13, 2020


Here is a question that we see often.

Question:

I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ?

So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what is does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part your put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'No Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous use it as an excuse to get money for selling items that may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $2 parts and an hours labour.

Sharp Televison... | Answered on Feb 12, 2020


What is the model number of your TV?
Give us clear specifications. . If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician

Sharp Televison... | Answered on Feb 12, 2020


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Sharp Televison... | Answered on Feb 12, 2020


unscrew cable and put antenna connection there change the source to air or antenna

Sharp Televison... | Answered on Feb 11, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76396 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18360 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...