Sharp Logo

Sharp Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 4K Products
  • 124K Answers
  • 3M Views

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sharp Televison... | Answered on Jul 11, 2020


Google it!
https://www.google.com/search?client=firefox-b-d&q=user+manual+for+my+sharp+EL+-+w535HT

Sharp Office... | Answered on Jul 07, 2020


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.
Just note; some models of Sharp televisions uses Philips circuit board.
Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Sharp Televison... | Answered on Jul 06, 2020


During installation , use sharp ar205 developer and sharp ar021 toner cartridge. This shows you did not use developer or used the wrong ones, good luck.

Sharp AR-5320... | Answered on Jun 29, 2020


I had the same problem. Try this. Contact Sharp and have them email you the firmware update. You will need to download it from the email and transfer it to the player via a flash drive. See if that works. I am about to return my Sharp Blu Ray player to Costco and go back to DVD. There seem to be a lot of problems with the technology. Even when movies start to play, they have freezes and it is sometimes hard to get the menu to show up

Sharp Televison... | Answered on Jun 29, 2020


Probably a blown safety fuse internally caused by a faulty magnetron or door switch.

Sharp Microwave... | Answered on Jun 24, 2020


  1. The fan won't start even though the AC is on.
  2. The fan won't stop, even when you shut the AC off.
  3. The fan turns on, yet the blades are rotating very slowly.
  4. There's a rattling noise coming from the condenser unit when the fan is turned on.

Sharp Heating &... | Answered on Jun 24, 2020


Take the body cover off and locate the regular glass fuse near the control panel wiring and make sure the fuse is good. A blown circuit breaker is the first clue that the fuse could have also blown.

I have rescued tons of microwaves for the lack of a 50 cent fuse.

Sharp Microwave... | Answered on Jun 23, 2020


blow any dust out of the projector with canned air. the dust keeps in the heat that the projector is trying to expell. also check the fans.

Sharp XR-30X... | Answered on Jun 23, 2020


Possibly stucked volume button on tv

Sharp Televison... | Answered on Jun 22, 2020


check if the data notification light is blinking

If no
The machine is in offline mode - Turn ONline
Connector issue - Check printer cable to resolve
Mchine not selected correctly in the application - check printer settings in windows or app
Printer driver issue - Visit the sharp website and download the printer driver and reinstall

If Yes
Check tray setting size
check size of paper

Sharp Office... | Answered on Jun 21, 2020

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sharp Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18402 Answers

Are you a Sharp Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...