Sharp Office Equipment & Supplies - Page 4 - Popular Questions, Answers, Tips & Manuals

Probably or the drive to it is not working if it 'rolls'. I gave you directions for a similar model in your other post..

If your Sharp XE-A203 cash register is not stopping printing receipts or transaction records, you can try the following steps to troubleshoot the issue:

1. Clear any pending transactions: Press the "CA/AT/NS" key to cancel any ongoing transaction and clear the display. If there are any pending transactions in the register's memory, complete or void them to clear the system.
2. Check the paper roll: Make sure the paper roll is not jammed or empty. Replace the roll with a new one if necessary, and ensure that it is loaded correctly.
3. Reset the cash register: Press and hold the "RC/ON" key for five seconds to reset the register. This will clear any error codes and may resolve the issue.
4. Check the programming: Make sure the register is set up correctly and that there are no programming errors. Refer to the user manual for instructions on how to check and reprogram the register.
5. Seek technical assistance: If the issue persists, contact Sharp support or a qualified technician for further assistance. There may be a hardware issue that needs to be addressed.

It's essential to ensure that the problem is resolved promptly as continuous printing can lead to a waste of paper and ink, which can be costly in the long run.

The Google search query for this is simply 3 words. make model manual https://www.google.com/search?q=setup+my+sharp+fax+machine ..

same as this model https://www.manualslib.com/manual/1186081/Sharp-El-1750piii.html?page=10 ..

H2 is an indicator that the temperature sensing device is reading open

If your Sharp AR 5320 is showing a paper misfeed sign and it is pointing at the heater unit side but there is no paper there, it is possible that there is a problem with the sensors or other components inside the printer. Here are some steps you can try to resolve the issue: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on again. This can help reset the printer and clear any temporary issues. Open the printer cover and check for any paper jammed inside the printer. If you find any, carefully remove it without tearing it. Check the paper tray and make sure it is properly loaded with the correct size and type of paper. Adjust the guides to ensure they are holding the paper in place. Clean the rollers and other parts of the printer using a soft, lint-free cloth. Dust and debris can accumulate over time and cause problems. Check the sensors inside the printer to make sure they are clean and functioning properly. You may need to consult the printer's manual for instructions on how to access and clean the sensors. If none of these steps resolve the issue, it is possible that there is a hardware problem with the printer. In that case, you may need to contact a qualified technician for assistance or consider replacing the printer.

Hi! try to reinstall driver. https://global.sharp/restricted/products/copier/downloads/search/us/detail/008785/download.html

Question edited for full 'make model (what it is)'.

Error Codes > Sharp > MX3610N > Code C1-14 - PrintCopy .info

https://printcopy.info > code=C1-14 Code: C1-14 · Description: Main charger trouble (Color) · Causes: The main charger unit (CMY) is not installed properly. There is an abnormality in the main ...

• Error Codes > Sharp > MX2600N > Code C1-14 - PrintCopy .info

  https://printcopy.info > code=C1-14 Code: C1-14 · Description: Main charger trouble (Color) · Causes: The main charger unit (CMY) is not installed properly. There is an abnormality in the main ...

SOLVED: Error code C1-14 - Sharp MX5001N - Fixya

https://www.fixya.com > ... > Sharp Apr 9, 2019 - Code. C1-14 · Description. Main charger trouble (Color) · Causes. The main charger unit (CMY) is not installed properly. There is an abnormality ... How to remove error code C1-14 For Sharp MX-2501N - Fixya Sept 5, 2019 Questions & Answers for: sharp error code c1 14 - Fixya Nov 16, 2019 SOLVED: Sharp mx 3100n C1-14 error code - Fixya Dec 12, 2020 Error code C1-14 - Sharp Mx-2310u Color Copy/print/scan Apr 8, 2013 More results from www.fixya.com Missing: 3640 ‎' Must include: 3640

Sharp MX-2630 Error C1-14 - Copytechnet

https://www.copytechnet.com > ... > Sharp Apr 27, 2019 - Error Code Sharp MX-2630 Error C1-14. If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to ... Sharp MX2640 error C1-14 Jun 20, 2017 Error Code C1-14 on MX3100N Jul 23, 2011 MX-6240, 7040 (Polaris) with error code C1-0X ... Jul 17, 2015 More results from www.copytechnet.com Missing: 3640 ‎' Must include: 3640

Codes erreur SHARP - Sharp Photocopieur

https://www.photocopieur-sharp.com > codes-erreur-sh... C1. C1 10 MAIN CHARGER TROUBLE (BK). C1 14 MAIN CHARGER TROUBLE (COLOR). C4. C4 00 PTC TROUBLE. E7. E7 01 MFP IMAGE DATA ERROR. E7 03 HDD TROUBLE.

Sharp MX-2310U, MX-3111U (SERV.MAN68) Technical Bulletin

https://servlib.com > Sharp > Printer MX-2310U, MX-3111U (serv.man68). CCE-1425 MODIFICATION OF TROUBLE CODE C1-10 or C1-14 DUE TO DEFECTIVE MC PWB - Sharp Copying Equipment Technical Bulletin ...

Based on your description, it seems like the problem might be related to the drum unit. The drum unit is a critical component of the printer and it's responsible for transferring toner onto the paper. If there's a problem with the drum unit, it can cause various issues, including creaking or heavy sounds during startup. Here are some steps you can take to troubleshoot the issue further: Inspect the drum unit: Carefully examine the drum unit for any signs of damage or wear. Look for cracks, scratches, or other visible signs of wear and tear. If you notice any damage, you may need to replace the drum unit. Clean the drum unit: If the drum unit appears to be in good condition, try cleaning it to see if that helps resolve the issue. Use a soft, lint-free cloth to wipe down the drum unit and remove any dust or debris that may have accumulated on its surface. Reinstall the drum unit: Once you've cleaned the drum unit, reinstall it back into the printer and try starting it up again. If the creaking or heavy sound returns, it's likely that the drum unit needs to be replaced. Contact a technician: If you're not comfortable replacing the drum unit yourself, or if the issue persists after replacing the drum unit, you should contact a qualified technician for further assistance. They will be able to diagnose the issue and recommend the best course of action. In summary, based on your description, it seems likely that the drum unit may need to be replaced. However, before you replace it, try cleaning it and reinstalling it to see if that helps resolve the issue. If the problem persists, contact a technician for further assistance.

If you have opened and closed all covers on your Sharp MX-4071 printer but are still receiving a "Close Printer Cover" error message, there may be a few possible reasons why this is happening. Here are some troubleshooting steps you can take:

1. Check for any paper jams: Open all covers and inspect for any paper jams or debris that may be obstructing the printer's internal components. Clear any jams or debris that you find and ensure that there are no obstructions left inside the printer.
2. Check the covers and sensors: Make sure that all covers are properly aligned and closed securely. Check the covers for any damage or signs of wear and tear that may be preventing them from closing correctly. Also, inspect the sensors that detect the covers to ensure that they are not damaged or obstructed.
3. Reset the printer: Power off the printer, unplug it from the power source, and wait for about 30 seconds before plugging it back in and turning it on again. This will reset the printer and may resolve the issue.
4. Update the printer firmware: Check if there are any available firmware updates for your Sharp MX-4071 printer and install them. Firmware updates can sometimes fix bugs and errors that may be causing the "Close Printer Cover" message to appear.

If none of these steps resolve the issue, you may need to contact Sharp support or a qualified technician for further assistance. They can diagnose the problem and determine if there are any hardware issues that need to be addressed.

Entering the simulation mode :Machine in Copy mode: Select Program key > Asterisk (*) key > Clear key > Asterisk (*) key > Ready for input of main code of simulation.https://printcopy.info/?mod=ts&brand=Sharp&model=MXM316N&tID=1561

Error status https://www.manualslib.com/manual/885094/Sharp-Ar-6020.html?page=111 https://www.google.com/search?q=Sharp+AR+6020+copier+is+showing+triangular+red+light+and+is+blinking+inclusive+of+green+light+blinking ..

If you are experiencing horizontal lines on your printed documents when using the Sharp AR M355N printer, there are a few steps you can take to troubleshoot and fix the issue:

1. Clean the printer head: Use a clean, dry, and lint-free cloth to gently wipe the printer head. The printer head is the part of the printer that contacts the paper, so if it is dirty or clogged with ink, it can cause horizontal lines. Be careful not to apply too much pressure or touch the printer head with your hands.
2. Check the toner cartridge: If the toner cartridge is low or empty, it can cause horizontal lines. Replace the toner cartridge if necessary and check if the problem is resolved.
3. Check the paper: The paper used in the printer may be the cause of the horizontal lines. Ensure that the paper is compatible with the printer specifications, and is not damaged or folded. Try printing on different paper to see if the problem persists.
4. Run the printer's cleaning cycle: The printer has a built-in cleaning cycle that can help remove any ink buildup or debris that may be causing the horizontal lines. Refer to the user manual for instructions on how to run the cleaning cycle.
5. Check the printer settings: Ensure that the printer settings are correctly configured for the document you want to print. For example, if you are printing a high-resolution image, make sure that the printer's resolution settings are set to match the image's resolution.

If none of these steps resolves the issue, you may need to contact Sharp support or a qualified technician for further assistance. They can diagnose the problem and determine if there are any hardware issues that need to be addressed.

RTM (FREE MIRROR LINK) Sharp UX P115 https://www.manualslib.com/manual/262144/Sharp-Ux-P115.html usa ANSWER AND SITES USA ONLY , POSTED BY ME. UX P115 https://www.sharpusa.com/support.aspx DOA FOR THAT MODEL.. 21 YEARS OLD THEY ENDED IT.

you can reset it. That it like printer in our office in the here

Videos here for H5 Error. https://www.google.com/search?q=sharp+AR+6020+photocopier+H5+error ..

If the light is steady, check the paper in your paper tray (or bypass tray, if that is currently selected). Add paper. If there is paper in the tray, try putting fewer sheets in the tray. If the tray is too full, sometimes the printer can't pick up the paper. Similarly, if the tray is nearly empty, try adding paper. Next consider taking all of the paper out and refilling the tray with paper from a new (just opened) ream. If the paper picks up atmospheric moisture, it can warp and be hard for the pick up rollers to handle. If these steps don't solve the issue, the problem may be the paper pickup rollers themselves. The printer may need service. (If it is under warranty, contact the manufacturer.) The manual for the printer is available here: https://www.sharp-cee.com/cps/rde/xbcr/documents/documents/om/34_ppc/AR5618-D-5620-D-5623-D_OM_GB.pdf . See page 87 (page 89 of the PDF) for the troubleshooting guide. I hope this helps. Cindy Wells