Sharp Wizard - Recent Questions, Troubleshooting & Support - Page 9
I lost the password and need to reset it. Please help.
I contacted Sharp Tech support who told me to:
Touch the reset button on the back of the unit. The display will show "RESET?"
Touch the 2nd tab on the front of the unit.
This will reset the unit to factory settings. All information will be lost, but you will be able to use the unit again. I did this and it worked beautifully.
on Nov 05, 2008
Sharp OZ-590A USB Cable Problems
Uninstall all the software you just installed and do not connect the usb device until you again run the install from OZ-590A CD. When it does not find a USB device then connect USB and it should detect it. If you don't do it in that order you won't get a connection. It should come up on COM7.
on Aug 26, 2008
Have you tried transferring with the original software for the device? Here
is a page with download links for the original software, also here
is a free trial software that claims it can transfer this data.
on Jul 17, 2008
Transfer OZ-750 Data to Computer
and with the indulgence of otacon and Ekse...
You would need the Docking Module and the attached COM1 cable/plug.
You might find this
page/document very informative if not interesting. Should you need the software (Day-Timer Organizer), it is available here
. Additionally, a Q & A about OZ750 is here
Hope this be of additional help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
on May 06, 2008
Sharp Wizard OZ-730
Hi, I has this same problem but I found in the user manual this instructions and works ok: 1. Press and hold the Start key.
2. While holding down the Start key, push the RESET button
on the bottom of the Organizer using a pen or some other
pointed object. The following message will appear.
"Do you really want to initialize the organizer's memory (this will delete all data)? Yes:[ENTER/No:[ESC]
3. Press to initialize the Organizer.
The message .Working... Please wait.. appears while the
Organizer proceeds with the initialization procedure.
The Welcome message then appears.
on Feb 17, 2008
Not finding what you are looking for?