SENAO Computers & Internet - Recent Questions, Troubleshooting & Support


Wireless network passwording is done at the router, in the wireless setup area. Log into your router using the admin userid and password. Go to wireless settings and there you will see the option to set a password for the wireless network. One you set the password and save it, all devices that connect to your network wirelessly will need to be reconnected to the network, using the password you selected to gain access to the network.

SENAO High Power... | Answered on Sep 17, 2016


tx for vdrivers

SENAO High Power... | Answered on Feb 08, 2014


Use "change order of preferred networks" to lower the priority of the "not-wanted" network, to a level below the priority of the "desired" network.

SENAO NL2611CB3... | Answered on Feb 17, 2011


Go to this LINK.


If you need more help come back.Post / thumbs / testimonial are welcome!

SENAO High Power... | Answered on Dec 01, 2010


Enter the configuration utility inside the unit and run a signal survey. If the survey does not detect any access points, your radio section has gone bad. If it does detect the appropriate access point, examine the signal and noise numbers associated with the access point. For a reliable connection, there should be a difference of at least 18 between the two figures.

SENAO NL-2611CB5... | Answered on Apr 03, 2010


just buy a new one or farnell.com

SENAO NMP-8602... | Answered on Dec 18, 2009


Make sure that your port is open on your router to allow the connections. This setting is under the options in the software. You can follow this from the site to walk you through:

http://www.utorrent.com/documentation/connection-setup

That will allow you to connect to more peers. Also, make sure you have more seeders in the swarm. Good luck!

SENAO High Power... | Answered on Oct 23, 2009


Hi. Here is the manual.

http://www.senao.com/images/www.senao.com_English/NL-2611CB3-PlusDelx-Manual-V1-0.pdf?CATNO0=D&CATNO1=D3&CNT=1

Set your PC to use the static IP 192.168.1.10, netmask 255.255.255.0.

To login to the web manager, go to http://192.168.1.1. Leave the username and password blank. You can now configure the device and assign IP address etc.

SENAO NL-2611CB5... | Answered on Jul 21, 2009

Not finding what you are looking for?
SENAO Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top SENAO Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

Brad Brown

Level 3 Expert

18196 Answers

Are you a SENAO Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...