Scubapro Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 45 Products
  • 26 Answers
  • 11K Views

Call scuba pro they can assist you with problem if they can not fix it over the phone send it to them for repair or replacement.

Scubapro Subgear... | Answered on Apr 08, 2017


They sell aftermarket mouth pieces that you warm in water once soft and pliable you bite down it takes shape to your bite plate which is further back in your mouth and can not be pulled out .

Scubapro... | Answered on May 16, 2014


Denx7d could have not said it any better i have about 1300 dives on my gear and still in good shape and have annual service on my gear now i am a certified repair technician for scuba pro these regulators they sell are the best on the market hands down

Scubapro... | Answered on May 16, 2014


Oral inflate bcd and place in water watch for bubbles if in bladder send it back to scuba pro for repairs dump valves have seals that can be replaced

Scubapro Scuba... | Answered on May 16, 2014


balanced regulators make noise on initial pressurization

Scubapro... | Answered on May 16, 2014


these are controlled by scubapro due to they need specail testing equipment to repair regulators E..G now IP pressure is 135 psi and there is no adjusting screw shims and springs then the cracking effort test to see if you have pressure flutter or creep. these can not be seen with out testing equipment.

Scubapro Scuba... | Answered on May 16, 2014


the spg hose has a oriface in it so that if the hose burst you do not lose all your air underwater at once. have your scuba shop test it for proper operation.

Scubapro... | Answered on May 16, 2014


the whistle noise is some thing loose (torn o-ring) inside the second stage. this is covered under warranty. scuba pro offers a parts for life program which is no cost to you if 1st & 2nd stage with a computer are bought at one time. just pay service labor. the whistle noise will be repaired are replaced free under 1 year.

Scubapro Mk25 &... | Answered on May 16, 2014


I have a smartcom very nice dive computer this issue can ONLY be repaired by scubapro themselves the smartcom is obsolete they will give you trade dollars toward a galleo or luna which are better dive computers

Scubapro UWATEC... | Answered on May 16, 2014


Scuba pro has repair facilities everywhere they can fix this problem with a annual service kit.

Scubapro... | Answered on May 16, 2014


To rebuilt a first stage regulator requires special tools a quailfied service technician should rebuilt it put in a o-ring in the wrong spot can be fatal at deep depths you can call scuba pro direct and they can assist you in finding a repair facility close to you are they can repair it .

Scubapro MK11... | Answered on May 16, 2014


I use a Cressi reg no problems

Scubapro Full... | Answered on Sep 19, 2011


thay change all the seals weather there bad or not thay do it for safety reasons

Scubapro... | Answered on Apr 24, 2011


thay clean and change the o-ring the needly seat and new diaphram its some thing that you do every year to certifi for ins. purposes

Scubapro... | Answered on Apr 24, 2011


You should be able to pop the computer out of the rubber housing (it will be tight) the details will be on the back. Hope that helps.

Scubapro Uwatec... | Answered on Nov 05, 2010


You will need to contact your nearest Scubapro authorised dealer. You can look up your nearest dealer from the main scubapro website. Most Scuba shops that undestake servicing will be able to sort this for you as scubapro is a worldwide brand.

Scubapro MK2... | Answered on Nov 05, 2010


yes thats all you have to do, just make sure the lock ring is in place correctly. good luck and have a great holiday.

Scubapro Scuba... | Answered on Nov 04, 2010

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Scubapro Experts

Anonymous

Level 1 Expert

60 Answers

robert DIBBLE
robert DIBBLE

Level 3 Expert

448 Answers

Tom Chichester

Level 3 Expert

61334 Answers

Are you a Scubapro Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...