SATO CL - Recent Questions, Troubleshooting & Support
How to calibrate a sato cl408e?
Download the driver for your printer(free) from
www.nicelabel.cl
That driver is the best in the world for those printers. In the Options tab, check for calibrate... button in the bottom.
If you want to go manual:
- Turn printer off
- Hold feed/Cal button
- Turn printer on while holding the feed button for 5 seconds aprox.
- Your calibration will start when you let go the feed button.
Cutting position is NG
It could be just as simple as loosen screw...
I have been days trying to figure out with mine and finally was just a loose screwe on the side. Check out
How to install sato cl408e in windows 7
If your firmware is below 05.00.08.01
Then it won't get detected by windows 7. You will need firmware upgrade. Else, just go to www.satoworldwide.com and download the windows printer driver.
Not finding what you are looking for?