SanDisk Electronics - Others - Page 4 - Popular Questions, Answers, Tips & Manuals

You probably lost your data. To get it back you would have to re-format it. Passwords are important as you now understand. Loosing your password is the same as loosing the data.

You need to unlock the SD card as follows: then right click and "delete"

Use a Usb Drive Open My computer and see what drive it is Then Go to your picture you want to move Right click on it and click on send to and send it to your Scandisk Drive letter

Have you tried it in another computer to make sure the USB stick itself is not the problem? If you think the laptop OS system is the problem and its a windows system, go to Device Manager, thne to Universal Serial Bus Controllers and delete all the ones that are in there, some will not delete, just ignore them, delete all others, then reboot the system and try the USB again.

There is no way of doing this. If your pen drive is 4GB, that means it has only 4GB of memory chips in it. The only way to get 8GB is to buy an 8GB drive. Do not buy an upgraded (to 8GB) one, as they are lower memory ones that have had the firmware tinkered with to show 8GB, when the actual memory capacity is far less. 18.January.2015

Short answer is you can't. Its encrypted. If you could bypass the PW, it would not be very useful for protection. you may be able to format and use it as new, but not access the content on it currently at all.

Hi Put the memory card in your camera and reformat it. How to do this will be different from each model camera so you will need to look in your manual. Note all information pictures etc on the card will be lost. Hope this helps

You need to install the correct codec so the video player can read the format. The format is the extension [the 3 or 4 letters after the file name and period] that shows in Windows Explorer. You must have the 'show extensions' option turned on in Windows Explorer options. Do a search in Google for 'codec pacs', select the one you feel will be most useful, or a selection of them, download and install the pac/s, then your player should be able to read the files. A very good player is the VLC player. It comes with most of the popular codecs pre-installed and has a link for the more obscure ones. Again, Google it. If you find this useful, please say so!

When you say try to convert, you mean reformat from fat32 to NTFS? Depending on the size you may not be able to write it as a NTFS. Also, if you have anything on it you want to save, you need a raw recovery tool Squidoo has a good one. However, if it won't let you format to anything and keeps reverting to raw, most likley your drive is damaged beyond normal repair.

you need a adaptor to go on a standard sd card to unock , never buy a stand alone micro sd card

mybe the usb flash drive is not working it had happend to me also and I had to get rid of it.

Please be more detailed in your issue. Unable to display what? The more details your provide the better an answer you will receive.

if you have lost the password, you could attempt using a password cracker, but there are no legitimate methods for recovering a lost USB password.

On the actual card, make sure that the "locked-switch" is in the middle. The "lock-switch" is the sliding tab on the side of the micro SD card. The dial should be in the exact middle, or as close to the middle as possible, or the card will read something along the lines of "This data card in encrypted," when inserting the chip into the computer.

IF NOT SHOWN IN MY COMPUTER, YOU MUST CHANGE YOUR STICK.

Dnt worry, what you need to do is to right click- run .exe file as a administrator. It will ask you for new volume set it and quickly format afterwards remove memory card , again plugin and check again for the changes you have done.

Here is a video tutorial that can help you restore card data back from this formatted SD card step by step: https://www.youtube.com/watch?v=7PAMc6eNPbU I find it when my Seagate hard drive was formatted by my friend and it helps me restore most of my drive videos, files and images. So, it can also be useful for you. From now on, make SD card data backups all the time.

the sim card has to be registered with your service provider contact them and they will give you the PUK code

Quite easy to transfer computer pics to flash drive via Windows Explorer: 1. Plug USB flash drive and iPhone to computer. iPhone will receive a prompt to approve it. Approve it and iPhone will be automatically detected by computer. 2. Open Windows Explorer and head to "iPhone > Internal Storage > DCIM". A list of photos on iPhone will show up. 3. Hold "Ctrl" and select photos you would like to transfer to USB stick and press "Ctrl + C". 4. Create a new folder in USB drive or find a folder, then press "Ctrl + V" to transfer iPhone photos to USB flash drive. If you're prone to find more effective ways to transfer computer pics to flash drive, just check out this tutorial: https://www.leawo.org/tutorial/how-to-transfer-photos-from-iphone-to-usb-flash-drive-1361.html?=1400

Hi - Did you format it on your computer or in your device. You may need to format the SD card in the phone itself as computer formatting may not be compatible.