Samsung Office Equipment & Supplies - Page 8 - Answered Questions & Fixed Issues

Larry is on one again!

Try running the head cleaning program.

This may be caused by a broken plastic lever for the thermal head inside the printer. This is not particularly difficult to fix, but it not be attempted if you have more than two thumbs.

• The case is not difficult to open, nor is removing the pc board in the printer, but I suggest getting a service manual on the web for disassembly instructions. Reconnecting the LCD cable is painful. Search for "SPP-2040 service manual."
• Remove the printer assembly from the case.
• Remove the PC card from the printer assembly being very careful of the cables.
• From the top, look at the shaft that controls the up/down motion of the thermal head. At the end opposite the motor, inspect the white plastic lever. There should be no cracks evident, nor should the lever be "loose" with respect to the shaft. If this is not the case, this is not your problem. There is a "flat" on the shaft that should keep the lever from rotating.

• Remove the "upper plate." Two small screws and a spring at the opposite end.
• Rotate the lever so that it aligns with the "flat."
• Using small buss wire (or a paper clip), wrap the wire around the round part of the lever.

• Twist the ends of the wire tightly and as close to the lever as possible. There is not a lot of space here. Trim off the excess wire and position the wire as shown.

• Reassemble the top plate & spring.
• Reassemble the printer & test.

Hope that this has helped. al

CHECK
Printer is connected and power ON
In panel contro
go to Printers
choose Samsung Clx rigth click
unmark the check Use printer offline

Try printing a test page
rigth click Properties
click on
Print test page

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

This error is caused by a counter inside your printer not being correctly reset when the new belt is installed. To fix this problem follow the steps below:

1. Press MENU then #1934
2. Use the arrow keys to navigate to the Tech menu (this is different to the User Mode)
3. Navigate to DataSetup
There are two options from here, either select the CLEAR COUNTS option (the password 1934 works for most users) or select Clear All Memory (this will wipe all of your custom settings so try the other option first).

dear Irfan khan, pls. enter the date format as MM/DD/YYYY suppose it as 20th June 2014 enter as 06202014 ok.... if it not solved pls. write me....

check the sensor and wiring to it

open the cover and now remove the waist toner container (you say it is empty) check the conection to the drum unit sometimes if the waist toner is verry full there is a pille of toner closing this connection, now clean it and all the sorounding from the toner and mount the waist container back in his possition, close the front cover and try, it should work now.

https://h30434.www3.hp.com/t5/Samsung/My-Samsung-Xpress-M2835DW-had-red-light-blinking-quot-minor/td-p/7004515 and lots more information here https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00BFg5I9AVH-iuVAHQJI-mOgbiCZA%3A1613496391376&ei=RwAsYNi9Fsug5NoPxJqI-Aw&q=samsung+xpress+ml2835+flashing+red+light ..

The memory full message indicates the fax memory is full. You'll need to look at the Fax storage and either print or delete faxes. This unit may have a secure fax storage that requires a code to print those faxes. Check under Menu > Fax Feature > Secure Receive > Print (alternatively: Setup > Machine Settings > Fax Setup > Secure Receive > Print). You should see a prompt for the security code. There can also be stored print or fax jobs on the unsecured storage on the printer, Menu > Job Management > Stored Job. Similarly jobs can be stored on an external drive. Press the Document Box button > Next > System Boxes to see if there are stored jobs that can be deleted. On some printer/fax machines, I've seen just the list of sent and received jobs (with the date/time stamp and phone number) exceed that storage space. That doesn't seem likely in for the Samsung ProXpress SL-M3870FW. I hope this helps. Cindy Wells

Printers dont reset unless you unplug them from the power connection or mains. Try again.

this is caused by a failure of the fuser unit. The fuser usually heats the paper to fuse the toner to the paper.

Printer error 0x000003e3 is one that arises for some users when they try to print to shared local network printers in Windows. The full error message states: Windows cannot connect to the printer. Operation failed with error 0x000003e3. The misplaced Mscms.dll file, corrupt Printer spooler, and the incompatible printer driver is the main cause to lead such Can't Connect the Printer Error 0x000003e3 in Windows 10. Sometimes the connection problem if the printer is also responsible to occur the problem. If you also bumped into this error, there's no reason to panic. Carefully follow the simple steps here and get rid of it in no time. 4 Methods that Fix Printer Error 0x00003e3 1.Uninstall Latest Cumulative Update. 2. Check for Updates. 3. Restart Print Spooler Service. 4. Perform Registry Tweak. Or Follow Our Blog - Printer Error 0x00003e3

try factory rest your machine

try replacing the hard drive, that will solve the issue

Go to service mode and rest counter

Try factory rest your printer and try printing again

Try cleaning the transfer belt and the four drums. Use a soft cloth to wipe the drum

try going to service mode on the printer, go to service function & select parts replacement alert and disable the notification on OPC so that it doesn't show toner reading.

It means that there is a problem on the machine, it's alerting you for the parts that needs to be changed.