Samsung Office Equipment & Supplies - Answered Questions & Fixed Issues

where does the paper jam. in the drum unit or fuser unit. be specific so i can solve your problem

Samsung CLP-510... | Answered 2 days ago | 323 views

The Brother Printer In Error State Windows 10 is an error usually displayed when the printer is jammed, low in paper or ink, the cover is open, or the printer is not connected properly, etc. Here some applicable solutions to fix this error. Check all think that cause this Brother Printer In Error State Windows 10 Turn off the printer and check for a paper jam. Check if the printer is low on ink. If you are using a WiFi printer, turn on the WiFi of the printer and the modem router.

Solutions to Resolve Brother Printer In Error State Windows 10:-

1- Turn the Offline or Pause Printing Status of Brother Printer.

2- Restart Print Spooler to Resolve Brother Printer In Error State in windows 10.

3- Enable Automatic Updation Of Brother Printer Drivers.

4- Allow Plug and Play Detection to Resolve Printer in Error State.

5- Uninstall the Brother Printer and then Reinstall It Back to Your Computer or laptop.

If the problem continuous check this blog for a full solution with expert advice-Brother Printer In Error State Windows 10


Samsung CLP... | Answered on Jun 03, 2020 | 251 views

A Printer Is In An Error State issue on Windows or Mac system happens at printer low in paper or ink, the printer is blocked and the printer case is open or printer is not connected perfectly. Don't worry, if you are getting failed to wreck this error from your printer. We noted down some necessary steps at the most natural form in this blog by which you can get answers in your hand once you follow them. So, don't make yourself demote as we know every single issue has some obvious answer but the thing only we have to do is to put the effort into finding that solution.

Easy Steps to Resolve Printer is in an Error State:-

Step 1 -Check if the printer can make photocopies strongly and if yes then you can spot the issue which lies with the software or drivers.

Step 2 - Check if there are any new updates on software.

Step 3 - Check if the printer is working on any other device and can print it there.

Step 4 - While your printer is ON.

The Printer is in an Error State is a very harmful error this error is very annoying. If you want a full solution to this error check this blog and follow the steps given in the blog. We provide online support to any problem in printer Errors.


Samsung Ml-2160... | Answered on May 18, 2020 | 163 views

To reset Samsung printer manually, firstly press the Power button until the LED light turns off. Before proceeding to next step, confirm that your Samsung printer is off. Now, you have to remove the power cable from the back of Samsung printer and then leave your printer unplugged for 10 minutes.

Samsung Office... | Answered on Apr 25, 2020 | 43 views

Samsung Office... | Answered on Apr 17, 2020 | 89 views

To print a duplex page, follow these steps:
  1. Go to Device and Printers. ...
  2. Right click on the printer, then select Printer Preferences. ...
  3. Below Double-Sided Printing select Long Edge or Short Edge depending on preference. ...
  4. Click Apply and OK to save the changes.

Samsung Office... | Answered on Mar 28, 2020 | 49 views

This error is caused by a counter inside your printer not being correctly reset when the new belt is installed. To fix this problem follow the steps below: Press MENU then #1934. Use the arrow keys to navigate to the Tech menu (this is different to the User Mode)

Samsung Office... | Answered on Mar 25, 2020 | 54 views

I searched the internet using to see if I could locate support information for this printer.

The following link mentions software but didn't show how to troubleshoot the printer for that problem.

Samsung Office... | Answered on Mar 07, 2020 | 53 views

Replace the faulty fuser unit.

Samsung Office... | Answered on Mar 07, 2020 | 214 views

Link to Service Manual above for the ML4510ND model.

Quoting from link above:

Code: C3-1312
  • Display:Imaging Unit Failure: #C3-1312. Install imaging unit again.
  • Description:Toner sensor is defective. The machine can't detect the sensor signal in the imaging unit normally.
  • Remedy:1) Install the genuine samsung imaging unit. 2) If the imaging unit is already installed, check the following. • Reinstall the toner cartridge and imaging unit. • Check if the CRUM connector is normal. • Turn the machine off then on.

Another link to check, page 4-40:

Samsung Office... | Answered on Mar 06, 2020 | 528 views

replace k toner

Samsung ML 1866W... | Answered on Mar 01, 2020 | 215 views

how enter techmode os scx-4300 lazer printer

Samsung SCX-4300... | Answered on Feb 15, 2020 | 810 views

Samsung Office... | Answered on Feb 12, 2020 | 57 views

scanner matrix is burned out, replace the matrix

Samsung SCX-4300... | Answered on Feb 08, 2020 | 2,480 views


Samsung Office... | Answered on Dec 16, 2019 | 66 views


Samsung Office... | Answered on Dec 08, 2019 | 46 views

Not finding what you are looking for?
Samsung Logo

Family Lines

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides