Samsung TL - Popular Questions, Answers, Tips & Manuals

not sure if this link will help you out.. Lens won retract Google Search

reset the date in the camera to proper date/time.

Do you mean when you press the shutter release button, oohing happens? Are you sure you are giving the camera enough time to focus, before you press the button complete? Normaly, you have to press the button half way, and wait till the camera is focused. The camera will give an audio or a visual signal. Then press the button complete. Be patient. Point an shoot camera's sometimes need more than a second to focus. It is not like in the old days, every time you pressed the shutter release button the camera fired.

Just connect the usb cable to your printer only hp or cannon photosmart printer will print your pix directly attaching usb cable select the pix and send to the printing options in main printer menue

Samsung TL100

Try this link http://www.samsung.com/nz/support/model/GT-B5510CAAVNZ-downloads

The best way to transfer pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa. Organize edit and share your photos

Hi! Make sure you didn't accidentally turn off the "Steady Shot" mode. You can change this mode through the ''Menu'' button. If this is not a reason of vibrations, use manual for your device. You can try to find it here

You don't need any special software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo management program such as Picasa ( http://picasa.google.com ).

Getting out your battery is ok. Don't expect the lens to retract, because the camera has no power. But after you reinsert the battery, the lens should retract, because the camera knows in what position the lens is.Be sure the battery is in good shape. If the battery is not fully charged or even worse, when it is defective, noting will happen. When you have a multi meter, you could check the voltage of the battery. It should read a little more (few tenths of a volt) when measured with a multi meter. if it is only slightly less then what is printed on the battery, you can assume the battery is defect. The camera will not work with a defective battery, so in that case you should replace the battery.

sounds like a low battery problem. replace the battery

Do a factory reset

Sorry, there isn't a way. Once the photo was stored as a black-and-white JPEG file, all the color information was discarded.

After transferring any photos you want to keep, delete the photos from your memory card. Alternatively, you can format the card to clear the card completely.

Are you asking how to reset your camera? Please clarify. Here is a link to the users manual if that helps.

Dear Gaith,I recommend you take out your battery/ies, and re-install them into your camera. Without switching the camera on, leave it to charge for a couple of hours. Once you restart the camera, I'm certain it will work. If not, you have a dead LCD panel in your camera, which you must have to get repaired/replaced. Regards,Rebel K

The SLB-11A battery is for the WB1000 camera (one thousand). The WB100 (one hundred) uses four AA batteries.

Try taking the ps4 and unplug power cord. ... to make it work was remove the power cord and switch it on, it will beep with a light and then die (without the cord) then when u start it up hold down the boot button till it beeps twice and it will rebuild the database...