Samson Logo

Samson Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 309 Products
  • 3K Answers
  • 217K Views

hi, my samson xm610 have a problem even i tern off the voluem of each chanel still have a sounds be fore is not just like that.. can you help me

Samson Xm610... | Answered on Jun 13, 2020


There are 2 ways to mute or un-mute the mic:
  1. Push the button on the front of the mic
  2. On the computer, open Recording Properties and go to the Levels tab and click the speaker icon next to Microphone slider.

unmute-samson-meteor-mic-d0vcjmxs03lzv3cifcn42mqj-1-0.jpg

Samson Audio... | Answered on Jun 10, 2020


It will not put out sound
6_10_2020_2_30_19_am.jpg

Samson Auro... | Answered on Jun 10, 2020


So, if I am understanding you right. As you are talking on the mic you are cutting out as if it is shutting down. If this is the case I would adjust your settings. It sounds like it is clipping from maxing out the input. A protection is cutting you out. Let me know if this is not the case.

Samson Airline... | Answered on Jan 10, 2020


You need to replace the power resistor R54:
http://gisywall.blogspot.it/2016/01/zoom-g1xn-continuously-shows-bt-on.html

Samson ZOOM G1x... | Answered on Oct 28, 2019


Ok. First, check your power supply voltages....then check IC2 for correct voltages and also check C9 ,C17 for ESR...clip signal can come from either woofer or horn circuits...lift one end of R19 in the preamp ckt....this will break the woofer signal and see if the light goes out...if it does, look for issues with the pre-amp after it seperates the hi and low signals...if not, then look for problens in the horn circutry.....and get a schematic....it will make it so much easier....good luck....

Samson Auro D415... | Answered on Sep 22, 2019


Hi, have you tried the G-Track Pro on another computer, to see if it repeats the fault?
I sent you the link so you can download the user manual of your Samson
I hope you can solve the problem
Greetings Franco Dosil

Hola, has probado el G-Track Pro en otra computadora, para ver si repite la falla?
Te env?o el link para que puedas descargar el manual de usuario de tu Samson
Espero puedas solucionar el problema
Saludos Franco Dosil
http://www.fixya.com/answer/answerpageslideview.aspx?ctg=mine&fml=0&brd=0&p=2&thid=27347935#

Samson Audio... | Answered on May 26, 2019


this confused me too! if you havn't figured it out already there is an adaptor screwed into the mic clip to work with standard mic stand mounts. in order for it to fit on the desk stand that comes with it, you have to to first unscrew the adaptor sitting inside the barrel of the mic clip. then it will be the right size to screw onto the stand.

Samson G-TRACK... | Answered on Mar 27, 2019


You can safely connect your powered monitor speaker to either the monitor output jacks or the tape output RCA jacks on your XP510. In addition, you may download the owner's manual here:
https://www.manualslib.com/download/515708/Samson-Expedition-Xp510.html

Samson Music | Answered on Oct 31, 2018


Here are some instructions relayed from someone who was able to fix a similar problme with help from Samson tech support:

The C01U is a WAV device. Therefore, adjusting the slider for your default MIC input level on the volume control applet does not adjust the gain on the C01U. You access the actual volume control for the C01U as follows:

Start, Settings, Control Panel, Sounds and Audio Devices
Click on Audio tab.

Under "Sound Recording", insure that Default Device is selected as Samson C01U.

Once Samson C01U is selected as Default Recording Device, click on the Volume button just below the name. A new window will pop up, with a vertical slider. This window will be labelled "WAVE IN", however it actually does control the MIC volume for the C01U.

The key here seems to be that the USB device that represents the Microphone input (as far as Windows is concerned) is not a traditional microphone, but (as mentioned above) a WAV-IN device.

Samson C01U... | Answered on Aug 28, 2018


The static after several seconds seems like this is a problem with certain versions of OS X. You might be able to fix it by downgrading or upgrading. Apple Forums say that it's fixed in 10.5.6.

You can double check that this is the problem by trying it on a Windows computer.

Samson G-TRACK... | Answered on Jun 16, 2018

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Samson Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Lawrence Oravetz

Level 3 Expert

10548 Answers

ray gallant

Level 3 Expert

71004 Answers

Are you a Samson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...