Ruud Heating & Cooling - Page 6 - Recent Questions, Troubleshooting & Support
How many tons is a RUUD UAPM-060EZ
Ton rating is not used any longer. It is now called SEER and is completely different, You can convert BTU to either one and the spec on the machine is : 4 HP, 208-230V, 1 PH, 49,400 BTU, R410A
Uotside unit blowing cool air but hot on the inside
It sounds like you have a unit called a heat pump. When a heat pump unit is in cooling mode the outside unit blows hot air and the inside unit blows cold air. If the outside unit is blowing cold then the indoor unit is most likely blowing room temperature or warm air. It sounds like the thermostat could be controlling incorrectly or you could have a failed reversing valve which is the device that switches the unit from heating to cooling mode.
Red light flashing
if you check the inside of your furnace panel theirs a section where it says notes that should point you in the right direction. If you find it that will give me more info also do give you more advice
Not finding what you are looking for?