Rowenta Irons - Page 6 - Recent Questions, Troubleshooting & Support

Rowenta Focus DZ5075U1 user manuals

Rowenta Irons | Answered on Feb 16, 2018

The small transfer water-line to the steamer section has closed up. This is due to contamination of salts, accumulated calcium or other debris. Its baked on and not easy to remove. All I can tell you is: always use filtered water or distilled water in the NEW IRON that will replace this one.

Rowenta Irons | Answered on Feb 11, 2018

We have no way to look that type of info up at this website.

Rowenta Irons | Answered on Feb 06, 2018

check the iron's label and see what voltage its rated for. If its from over seas and you are in the states with it, you will be wise to buy another iron. The adapter you would need is called a step up transformer and it would need to be large. 2000w or so. An iron would be much cheaper.

The label will say 240z 50hz or 110 60hz. if it says 110 60hz then you have another problem.

Rowenta Irons | Answered on Feb 02, 2018

You have a build up of water In the hose. Sometimes happens because the hose is too low to the ground. Try stretching the hose up and tap it and the water should travel back down the hose.
Another reason could be that you are using too much steam for that particular fabric.

Rowenta... | Answered on Jan 05, 2018

If you didn't keep it clean, it may have just burned out. Hard to say.

Rowenta Irons | Answered on Dec 31, 2017

Your expensive Rowenta iron is leaking and will have to be replaced.

Rowenta Irons | Answered on Dec 24, 2017

Not finding what you are looking for?
Rowenta Logo

1,797 questions posted

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts


Level 3 Expert

13434 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Brad Brown

Level 3 Expert

18360 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides