Rowenta Irons - Page 10 - Recent Questions, Troubleshooting & Support

0helpful
1answer

How do I get the wheels off?

Just pop it off. Need force, no need to take hub caps off.
6/30/2016 7:39:56 AM • Rowenta... • Answered on Jun 30, 2016
0answers

Rowenta DE iron

Be the first to answer 6/27/2016 12:14:57 PM • Rowenta Irons • Posted on Jun 27, 2016Be the first to answer
0helpful
1answer

A Rowenta electric iron

clean with steel wool or simply get a new iron with teflon base
6/7/2016 11:40:11 PM • Rowenta Irons • Answered on Jun 07, 2016
0helpful
1answer

Trigger button broke during ironing. What to do?????

The fix is easy, order the trigger that has an actuating tab that is probably broken off. Gently pry up the blue cushion from the front to the back near the cord and you will see the tab lying over the switch. I order my parts from the Rowenta Region Service Center below:

California Electric Service in Concord CA (it is the only Rowenta repair station in California) go to either of the following addresses:
their website is: http://www.californiaelectricservice.com/
or tech service: [email protected]

Keep us informed as you resolve and solve the problem. It is a fine machine and well worth the repair.
6/6/2016 11:38:18 PM • Rowenta DG-980... • Answered on Jun 06, 2016
0answers

Free ecoin

Be the first to answer 4/29/2016 8:44:34 AM • Rowenta 1700W... • Posted on Apr 29, 2016Be the first to answer
0helpful
1answer

How to open is 9050 rowenta precision valet to descale

Well this was helpful but also HELLfull! I guess because I have a 9050 !! I took out the screws & could not remove the hose it was attached with 2 clamps & a washer! I put the whole darn thing in my tub ( I have a sprayer in there) and yes tons of sand, black stuff and cloudy water came out. I had to do this 8 times with the hose attached! Awkward & a mess but it did finally come out clear. BTW I did it through the hose & the bottom hole. On the last run through, after my whole bathroom is soaked including me, the hose popped out! I was cracking up! turns out on the 9050 you simply push down on the ribbed hose covering and it releases. This IS NOT in the manual either. But I'm happy my steamer's like new again & live & learn ;o)
4/15/2016 6:37:25 AM • Rowenta... • Answered on Apr 15, 2016
0helpful
1answer

My Rowenta pro precision iron steam station gets hot but doesn't steam. How do I get the iron to produce steam?

There are two cause. One the boiler resistance doesn´t turn of because of snap disc or bimetal thermostat fault or because a coil in the working valve (security valve). But if you can heard a click of opening movement of valve when you push the button it is able to be a thermostat.
4/13/2016 6:15:03 AM • Rowenta Irons • Answered on Apr 13, 2016
0helpful
1answer

Iron not heating

Hi,

Here is a tip that will help you to troubleshoot our iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101
4/3/2016 6:50:26 AM • Rowenta DZ5080... • Answered on Apr 03, 2016
0helpful
1answer

Where can I get a manual for this product?

Rowenta PERFECT 1103897124 User Manual Appears to be the same model as yours.
3/23/2016 3:24:17 AM • Rowenta DX9800... • Answered on Mar 23, 2016
Not finding what you are looking for?
Rowenta Logo

1,789 questions posted

Ask a Question

Usually answered in minutes!

Top Rowenta Irons Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Rowenta Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...