Rotel Logo

Rotel Popular Questions, Answers, Tips & Manuals

Do you work here? Claim your company

  • 40 Products
  • 138 Answers
  • 19K Views

Hello Ruben, so you do not open the CD holder tray of your Rotel, the problem is that the belt that transmits the rotation of the engine to the mechanism of the car, may be stretched and therefore the car does not open, this is the most common fault in this type of CD players
You should replace it, if you can not do it, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Ruben, por lo que cuentas, no se abre la bandeja porta CD de tu Rotel, el problema es que la correa que trasmite el giro del motor al mecanismo del carro, puede estar estirada y por lo tanto el carro no se abre, esta es la falla mas habitual en este tipo de reproductores de CD
Deber?s reemplazarla, si no puedes hacerlo, busca un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

https://elektrotanya.com/rotel_rcd-951-tm.pdf/download.html
http://bwgroupsupport.com/downloads/manuals/rotel/RCD-951-OM.pdf

Rotel Audio... | 58 views | 0 helpful votes


hi
it sound to me that when you biamp and driving speaker and woofer , you are over loading the fuses , suggestions
uprate the fuses till they stop blowing

Rotel Audio... | 152 views | 0 helpful votes


Probably the EEPROM, the heart and brain of the appliance.
I had the same issue with my AIWA, could not figure out the cause, took it in, tech told me EEPROM is blown.
Not economical to repair.

Rotel Audio... | 177 views | 0 helpful votes


Your changer has lost its mind and is doing crazy things.just like mine. Software issue not repairable.. Go shopping.

Rotel Audio... | 150 views | 0 helpful votes


Hello Fayeshep,

They are indeed beautiful machines...!!

I looked for service and customer contact

See the top & bottom of the ROTEC AU page (below)

Good luck & happy hunting...

Rotel Australia Home Theater Hi Fi and Custom Installation

Rotel Televison... | 145 views | 0 helpful votes


Check the rest of the power supply, for example the transformer if there is no power at all. If you are getting some indication of power, check the voltage regulator circuit.

Rotel Audio... | 290 views | 1 helpful votes


If the Unit Powers On then most probably the Fuses could have gone bad You will be able to replace the Main Fuse yourself but REPLACE WITH THE SAME KIND OF FUSE in terms of RATING

Rotel RX-950AX... | 97 views | 1 helpful votes


Hi Awal. Interesting problem. Have you tried another pair of leads? What source are you using please, cd tuner etc? I noticed the the names for the five audio/video inputs can be customized by the user, Maybe there is a firmware issue? With the unit being surround sound Have you tried running in 2 chanels only?

Rotel Audio... | 121 views | 0 helpful votes


I'm guessing you don't know for sure that it even needs fuses. They don't go out like they used to, as everything is controlled by a microprocessor(computer within your unit). I would suggest, that you, with the power plug pulled out, use an ohm meter to be sure that each fuse is shorted. If you need further assistance, or would like to inquire about a repair, please visit my website at audioserviceclinic.com. Thank you.

Rotel Audio... | 118 views | 0 helpful votes


Try interchanging the speakers. If the right channel works, you have a problem with your speaker.

Rotel Audio... | 330 views | 0 helpful votes


I do not know anything about your brand or market, but I have had good success with replacement remotes at http://www.replacementremotes.com/
They have a very wide selection of mostly refurbished remotes.
Originally supplied with RSX 1058 is this:
http://www.replacementremotes.com/ROTEL/Buy-RR-1061-RR1061-Audio-Remote-Control.html

Rotel Audio... | 185 views | 0 helpful votes


hi
I can't give you the schematic diagram but I might help you. What is the problem?

Rotel RMB-1095... | 113 views | 0 helpful votes


Turn off the other channel and listen only to the bad channel playing some music. Turn it up! If you hear any music the pre-amp is working and the power amp is faulty. If you don't, then the pre-amp is faulty.
Because it's a stereo amp you have the good channel to compare with the bad. So you can do voltage tests, or "buzz" tests. Buzz Tests or where you apply a insulated tool to the circuits, a buzz will be heard. If it buzzers in the good channel it should in the bad. Ignore the power supply and don't short any parts out!

Rotel Audio... | 93 views | 0 helpful votes


If it's an old type control then you can spray it with Servisol switch cleaner. You might have to take the top cover off to get better access.

Rotel Ra-2030... | 80 views | 0 helpful votes


It's more likely to be a fuse that's gone. If so it could be caused by faulty device on the heat sink.
The only device that converts power is a Transformer. You can test this by simply putting a Volt meter on it's terminals. They are not hard to fit, however they have to be replaced by the same thing or one approved by Rotel.

Rotel Audio... | 83 views | 0 helpful votes


try new battiers in the remote.

Rotel New... | 94 views | 0 helpful votes

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Rotel Experts

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76376 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Rotel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...