Roland Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

0000007 eternal error

Roland SOLJET... | Answered on Jul 24, 2019

try easy cut studio from
I've used it to cut a variety of vinyl decals using my own Roland GX-300 cutter and other artwork. It it completely compatible with my Roland GX-300 machine and very easy to use.

screen shot 2017-10-28 at 10.24.45 am-ray0nbkklnl1x1e5n12mjxoc-2-2.png

Roland GX-300... | Answered on Jul 10, 2019

Appears if the number of parameters differs from the permissible number.
You can download the EasyCut Pro software from and give it a try.
This vinyl cutting software works great with Roland GX-300 CAMM-1 Pro Vinyl Cutter.

Roland GX-300... | Answered on Jul 10, 2019

Sounds like the motor is jammed.
This is a scan motor over current error where a large load is put on the motor movement instantaneously. Turn the power off, clear any media jam that may have occurred and turn the printer back on. If the error continues, please contact your local Roland Service Center.

Roland Office... | Answered on Aug 06, 2018

wat's the internal error 000007
Roland soljet xj 640

Roland SOLJET... | Answered on Jul 31, 2018

Please help us the error code comes "dpics mode" in roland gx-500

Roland GX-400... | Answered on Aug 24, 2017

what 's call service 0110 error in Rolland versa RS 640

Roland Versa Art... | Answered on Jan 02, 2017

the 0101 error in sp540 is the Limit Position Initialize has not been done. you find videos on you tube that can help you to do the limit position operation. (you have to enter in Service Mode Menu) its easy to do it yourself. i hope this help.

Roland VersaCAMM... | Answered on Jun 26, 2016

Could you try
(1) Temporarily stick a white strip over the sensor where it detects the media or
(2) On the length of the media or
(3) Even staple same sized white media below the black one which you can un-staple after printing.
kindly ignore if these are (s) tupid answers

Roland VersaCAMM... | Answered on Mar 23, 2016

if the problem is persists you have to replace the data cable connected to the head ( this cable goes foward and backward with the movement of the heads and sometimes it brokes ) i had the same problem and the solution is this.

Roland VersaCAMM... | Answered on Sep 24, 2015

Not finding what you are looking for?
Roland Logo

122 questions posted

Ask a Question

Usually answered in minutes!

Top Roland Office Equipment & Supplies Experts


Level 3 Expert

13434 Answers


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76352 Answers

Are you a Roland Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides