ROL Wheels Cycling - Answered Questions & Fixed Issues

If you mean the noise while coasting, cassettes don't make that ratcheting noise. The pawls in the hub/cassette body do. Changing the cassette will not change the sound.

ROL Wheels... | Answered on May 07, 2011 | 188 views

I don't have a bicycle nor do I repair bicycles.

Cycling | Answered on Dec 13, 2020 | 17 views

If you shop around there are plenty of styles of handlebar. Might be worth you trying a bar from a dirt bike or some sort of cruiser bike.
Another option could be to tilt your existing bars back a small amount and add a fork stem riser. Sometimes simply raising the handlebar height on the fork top can help.

Cycling | Answered on Jul 16, 2020 | 73 views

I do not think this will help, but it might give you some ideas:

Another design, that you would have to modify for your purpose but a very good idea:

again use this principle and do your own drawings:

Cycling | Answered on Jun 27, 2020 | 696 views

I can't find a manual, but the install is pretty basic. You need to bolt it to the frame, then remove one of the sprockets on the derailleur to get the chain through, then replace. Attach the cable through the locking nut, using the lowest gear first, then run it to the highest gear to make sure it runs through them all. There are some set screws to set so that the derailleur doesn't go past the upper/lower gears. It's all a matter of adjustment from there.
Hope this is of help

Cycling | Answered on Jun 06, 2020 | 875 views

Here is the link for front derail...

Cycling | Answered on Jun 02, 2020 | 148 views

With square-taper cranks, the bottom bracket spindle length required is determined by the particular brand/model of crankset.
You can find the specifications online if you do a search using the brand/model of crankset. You will need a crank puller and bottom bracket tools to change it out. The main crankarm bolts should be tight, around 30 ft-lbs of torque.

Cycling | Answered on Apr 25, 2020 | 99 views

try manufacturer or online search

Cycling | Answered on Apr 23, 2020 | 72 views

you have to put the pad in it's 1st possiton then tighten the screws.

Cycling | Answered on Feb 19, 2020 | 134 views

FIXYA doesn't appraise items.

Might try joining a forum for Walther P.38 to ask for assistance.

Cycling | Answered on Jan 16, 2020 | 130 views

Actually there is nothing that you can fell like 0

Cycling | Answered on Jan 02, 2020 | 184 views

Toll-Free / 800-451-KENT (5368)

Cycling | Answered on Oct 28, 2019 | 201 views

you can change the stem with other one, with another angle and reach.

Cycling | Answered on Oct 18, 2019 | 233 views

This may help you:

Cycling | Answered on Oct 15, 2019 | 159 views

If you have a local cycle shop I suggest you give them a chance because with the state of online sales, if you don't use local businesses they will be lost.

Failing that both ebay and Amazon offer a great many cycle parts...

Cycling | Answered on Oct 14, 2019 | 152 views

It's worth the same as any other bike in the same mechanical and visual condition. It has no significant collectible value.

Cycling | Answered on Oct 11, 2019 | 205 views

I have taken bikes to Thrift Shops (Value Village, etc.), and to recycling depots when they have provisions to donate them to various charities. In my area, migrant farm workers often get them. I think this info depends on your geographic area.

Cycling | Answered on Oct 07, 2019 | 301 views

Not finding what you are looking for?
ROL Wheels Logo

Ask a Question

Usually answered in minutes!

Top ROL Wheels Cycling Experts


Level 3 Expert

85239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35841 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Are you a ROL Wheels Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides