Robotoolz Logo

Robotoolz Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 20 Products
  • 135 Answers
  • 29K Views
0helpful
1answer
0helpful
2answers

I own a RT-3620-2. The liquid in one of the leveling windows has leeked out. Can I get this repaired?

Contact a laser service center. I doubt anyone will be willing to work on it. It would be a lot of research for a 2.00 part. Usually you will be unable to find parts for big box store lasers. A laser dealer may have a broken one laying around that he can pull a used part from. Just a a precaution I'd recommend never purchasing a laser from a retail store such a sears or home depot. If possible go with a Leica Geo-systems unit. Topcon, spectra physics, and trimble are also good lasers that have all parts readily available. In the service industry we call cst, bosch, robotoolz, "throw away lasers" because if anything at all goes wrong you throw it away. If i recall properly I have searched for parts for Robotoolz and contacted the manufacturer in the past. I was told that they are not supported and parts are not available. Check around and see if you can find a service center with a used part. Google search (Leica Geosystems, Topcon, Trimble Laser dealer).
1/23/2015 1:56:53 PM • Robotoolz... • Answered on Jan 23, 2015
0answers
0helpful
2answers

The laser will not light

First, be sure to clean the battery connection points with an electrical contact cleaner and be sure that the batteries are new, not just different. If that does not work, try placing the instrument in a freezer for at least 30 minutes. This worked with my 5 point Stanley Fat Max. The freezer will cause some condensation to form on the inside of the instrument, but why it makes the diode work is a mystery, at least to me.
1/7/2015 10:53:01 PM • Robotoolz... • Answered on Jan 07, 2015
0helpful
1answer

Laser level problem

I had the same issue. The laser would only turn on intermittently and mostly not turn on at all. Since the green led would come on for 2 seconds when you first turn the rotary laser unit on (as per the user manual) I decided that the problem was probably with the remote. I took it apart (4 screws) and cleaned the corrosion off of the battery contacts on the slider switch and the two plates that the switch sliders make contact with. I also bent the two thin slider contacts so that they would contact the corresponding plates on the circuit board with a little more pressure. Put it back together and that seemed to fix it.
1/7/2015 10:51:58 PM • Robotoolz... • Answered on Jan 07, 2015
0answers
0helpful
1answer

WHY DOES THE LASER COME ON FOR ABOUT 5 SECONDS AND THEN GOES OUT.

if you go any where and your not playing your game before you go unplug your console
7/1/2014 9:54:02 PM • Robotoolz... • Answered on Jul 01, 2014
0helpful
1answer

Were can I down load a robo laser rbo 1001 manual

nobody ever sent me any help. still cant operate
6/30/2014 12:46:50 PM • Robotoolz... • Answered on Jun 30, 2014
0answers
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Robotoolz Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

40360 Answers

ray gallant

Level 3 Expert

73505 Answers

 Mikey
Mikey

Level 3 Expert

6726 Answers

Are you a Robotoolz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...