Robotoolz Measuring Tools & Sensors - Page 6 - Recent Questions, Troubleshooting & Support
The self leveling does not
hi chapelhillco. Remove the batteries and clean the contacts with the eraser end of a common pencil. Then clean the contacts on the batteries and reinsert them. This may solve the problem.
Thanks for choosing Fixya!
Cant calibrate laser
You must place the unit 30' from a wall, level the unit with the level indicating vials, mark spot on wall or object, rotate laser 180 degrees and level with vials again, if it comes to the same spot your unit is calibarated. if not then you must do this process at least 2 times(1 for each directional level) and use the adjusting screw to move vial. it takes a while to get it right.
11/29/2010 7:52:38 AM •
on Nov 29, 2010
Uno.comi have a robolaser level
I have a Porta-Cable,I found that the clicker's battery always had a bad connection so I put packing around it and it has worked so far. I've also found that the first time moisture hit the thing the spread lazor lost it's power. If yours worked for 10 years, then it already paid for itself.
10/22/2010 2:18:28 AM •
on Oct 22, 2010
I sent my unit in
There seems to be much confusion with the leveling feature of this tool. The directions are not real clear either whenit comes to leveling. You should call the
manufacturer to get tech support. I will send you a link to there site
and phone #.
9/17/2010 8:40:15 AM •
on Sep 17, 2010
I have a Robo Laser
Hi. Did u open the front and turn on the remote to activate the laser ? This is what it usually takes to get the beam out there. J.
If this doesn't work, return it. J.
7/9/2010 8:01:14 PM •
on Jul 09, 2010
Not finding what you are looking for?