Robotoolz Logo

Robotoolz Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 20 Products
  • 136 Answers
  • 29K Views
0helpful
1answer

I have 7690-2 ROBOTOOLZ that wont run on batteries. Is there a fuse somewhere? Works with AC adapter but not handy on job sites

Page 18? https://www.manualslib.com/manual/1314734/Robotoolz-Rt-7690-2.html

ROBOTOOLZ RT-7690-2 USER MANUAL Pdf Download ...

https://www.manualslib.com > ... > RT-7690-2
View and Download RoboToolz RT-7690-2 user manual online. Self-leveling, remote-controlled, simultaneous level and plumb rotational laser system. Or contact the maker.
6/8/2021 10:13:05 PM • Robotoolz... • Answered on Jun 08, 2021
0helpful
1answer

RoboToolz RT-A7200-1 remote has a broken battery 9 volt terminal. Where can I send it for repair?

Normal repair of a 9-volt terminal is to salvage the top of a dead 9-volt battery. Do not use a good 9-volt as they are prone to dangerous expansion if shorted. Take the salvaged battery top and add short red and black leads with a soldering gun/pencil. Use rosin core solder only, not acid core or solid. Replace the damaged terminal using above by connecting the short leads to the original terminals or circuit board traces.
8/15/2019 2:10:26 AM • Robotoolz... • Answered on Aug 15, 2019
0answers
0helpful
2answers

Dropped rt7210-1 bearings out laser and drive ok

Dropped my robolaser RT7210-1 and the bearings came out.
10/26/2017 9:02:24 PM • Robotoolz... • Answered on Oct 26, 2017
0helpful
2answers

I need my Unit rebuilt, unit was knocked over and the bearings fell out.Can this be done?

Unfortunately no. Nothing you do will make this accurate again. These are throw away lasers.
10/26/2017 8:57:33 PM • Robotoolz... • Answered on Oct 26, 2017
0helpful
2answers

Need a RT-5250-1 Users Manual

Try freemanuals.com for your needs here
8/24/2016 6:01:44 PM • Robotoolz... • Answered on Aug 24, 2016
0helpful
1answer

Robotoolz Laser RB01001 calibration and manual

http://www.microprecision.com/instrument/ROBOTOOLZ-RB01001%20-CALIBRATION.html This would be a professional calibration to many known standards. I hope this helps you out. Thanks for visiting and leave feedback! I'm a newbie
7/13/2016 11:59:37 PM • Robotoolz... • Answered on Jul 13, 2016
0helpful
2answers

How do a get my tool to level it self? I have not used this tool in about 5 years it is like new. It has been sitting in my garage and I went to use it to set some plum and level lines and it will not

Bill the level is a pendulum type of device, therefore it is self leveling as long as it is within about 5 degrees of level. The pendulum has a lock for when it is not in use, make sure that you unlock this so the the unit can self level. It also has a flashing out-of-level indicator to warn you if you have not set the unit up within the 5 degrees of actual/real level. Paul.
9/5/2015 6:06:51 PM • Robotoolz 5Beam... • Answered on Sep 05, 2015
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Robotoolz Experts

ADMIN Canada
ADMIN Canada

Level 3 Expert

40086 Answers

ray gallant

Level 3 Expert

73420 Answers

 Mikey
Mikey

Level 3 Expert

6726 Answers

Are you a Robotoolz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...