Relisys Recent Questions, Troubleshooting Help & Support

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Try looking here: Relisys Dimera 3500

No. In fact, downloading from this camera will be a real challenge. It is designed to download over an RS232 serial port using a special cable. Have you got the cable? There is a website that has specs for the cable and driver download if you are technically inclined: Relisys Dimera 3500 If it were me, I would simply remove the memory card an read it in a universal card reader.

When it have this kind of error is a problem of the powerboard. Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them. But can be a problem with inverters... control the transistors - MOSFET on the powerboard. Good luck!

try separating wires. touching wires cause cross-talk of signals.

separate the wires in back. Touching wires causes cross-talk of signals.

Maybe that site uses software that your machine is not up-to-date on. Make sure all your software components are up-to-date (OS, Motherboard Drivers, Video Card drivers, Browser, Java, Flash, etc.)

This could be a problem with your internet browser, try an alternative browser like Mozilla Firefox or Safari You can download the installer for Mozilla Firefox here: https://download.mozilla.org/?product=firefox-30.0-SSL&os=win&lang=en-GB You can download the installer for Safari here: http://appldnld.apple.com/Safari5/041-5487.20120509.INU8B/SafariSetup.exe once installed, restart your computer, open one of the newly installed browsers & try again to access freestockcharts.com

This monitor was being sold in 2005. Time to upgrade.

if it does this without it being plugged into a computer then the horizontal hold is out on the main board of the lcd. if its ok w/o a computer connected then check the cable an pins, connect it to your laptop to test your computers video out issues.

The signal strength or format of the signal from your playback device does not mesh with the monitor's capabilities. As an example digital signals will not show on an analog monitor.

I assume by "adjustment screen" you mean the OSD (On Screen Display). This is the box where the menus for adjusting the screen appear. If I'm correct, that means you have pushed the "menu" button on your LCD and need to push it again to turn the OSD off. If pushing it again does not solve the problem I would say it's time to have the LCD repaired. In many, but not all, that OSD goes off on it's own after a bit.