My rc helicopter can not fly it spin in floor
Hi
This type of helicopter uses a fixed pitch blade. Have you recently replaced one or all the blades? If the blades are correctly positioned then once the motor comes to speed, the pitch of the blade creates enough lift to overcome the force of gravity. The problem you're having can only be that the motor is not coming to speed or the blades have been replaced but the pitch is now at the wrong angle.
Good Morning,,,,
1. What are function
Hi and welcome to FixYa. I am Kelly
The L screw is adjusted when your having problems accelerating from idle..i.e sluggisgh acceleration or stalls.
The H screw is adusted at MAX rpm only to get the fastest engine speed. You may have to make minor adjustments on the L screw after adjusting the H screw to smooth out acceleration from idle to MAX speed so that you do not have stalls or sluggish acceleration.
There is one major NO NO when making carb adjustments... NEVER screw the jets tightly closed. The jet tips will jam into the carb body and twist off. If you ever have to close the jets completely... ligtly close them.
Thanks for choosing FixYa,
Kelly
Need Manual for rc airplanes
The <a href="http://lightake.com/products.do/category.Wholesale_RC_Aeroplanes_Aircrafts-424">RC Airplanes</a> task process views for really wonderful. It through many useful information gather from here! I have like this site.
6/21/2019 2:41:40 AM •
RC Super...
•
Answered
on Jun 21, 2019
Not finding what you are looking for?